APRS Track Direct

My position About ☰

reset

E21QQQ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E21QQQ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1732308251	2 Pkt	0 Pkt	0 Pkt	-72 dBm	0.18 V
1732307329	1 Pkt	0 Pkt	0 Pkt	-71 dBm	0.21 V
1732306409	3 Pkt	1 Pkt	0 Pkt	-73 dBm	0.18 V
1732305484	1 Pkt	0 Pkt	0 Pkt	-71 dBm	0.18 V
1732304562	2 Pkt	0 Pkt	0 Pkt	-76 dBm	0.04 V
1732303640	2 Pkt	0 Pkt	0 Pkt	-73 dBm	0.18 V
1732302718	1 Pkt	0 Pkt	0 Pkt	-73 dBm	0.18 V
1732301795	2 Pkt	0 Pkt	0 Pkt	-73 dBm	0.18 V
1732300873	2 Pkt	2 Pkt	0 Pkt	-74 dBm	0.18 V
1732299951	1 Pkt	0 Pkt	0 Pkt	-74 dBm	0.18 V
1732299028	2 Pkt	1 Pkt	0 Pkt	-74 dBm	0.18 V
1732298105	2 Pkt	0 Pkt	0 Pkt	-74 dBm	0.16 V
1732297183	1 Pkt	0 Pkt	0 Pkt	-71 dBm	0.18 V
1732296265	24 Pkt	0 Pkt	1 Pkt	-74 dBm	0.18 V
1732295316	2 Pkt	0 Pkt	0 Pkt	-75 dBm	0.18 V
1732294955	1 Pkt	0 Pkt	0 Pkt	-75 dBm	0.18 V
1732293467	2 Pkt	0 Pkt	0 Pkt	-73 dBm	0.18 V
1732292544	1 Pkt	0 Pkt	0 Pkt	-72 dBm	0.16 V
1732291622	2 Pkt	0 Pkt	0 Pkt	-69 dBm	0.18 V
1732290699	2 Pkt	0 Pkt	0 Pkt	-73 dBm	0.06 V
1732289777	1 Pkt	0 Pkt	0 Pkt	-74 dBm	0.18 V
1732288854	2 Pkt	0 Pkt	0 Pkt	-76 dBm	0.18 V
1732287932	3 Pkt	0 Pkt	0 Pkt	-72 dBm	0.18 V
1732287009	1 Pkt	0 Pkt	0 Pkt	-72 dBm	0.18 V
1732286087	2 Pkt	0 Pkt	0 Pkt	-75 dBm	0.18 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)