APRS Track Direct

My position About ☰

reset

YC3BVG-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YC3BVG-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1754450849	0.2 Load	52 DegC	297 Mb	191 Pkt	156 Pkt
1754449944	0.17 Load	52 DegC	298 Mb	186 Pkt	156 Pkt
1754449039	0.18 Load	52 DegC	298 Mb	206 Pkt	159 Pkt
1754448133	0.17 Load	52 DegC	298 Mb	168 Pkt	165 Pkt
1754447229	0.23 Load	52 DegC	299 Mb	199 Pkt	166 Pkt
1754446324	0.17 Load	52 DegC	299 Mb	361 Pkt	164 Pkt
1754445419	0.2 Load	52 DegC	234 Mb	458 Pkt	169 Pkt
1754444514	0.21 Load	54 DegC	235 Mb	170 Pkt	152 Pkt
1754443608	0.22 Load	52 DegC	235 Mb	174 Pkt	157 Pkt
1754442703	0.18 Load	52 DegC	236 Mb	168 Pkt	158 Pkt
1754441798	0.25 Load	53 DegC	236 Mb	199 Pkt	151 Pkt
1754440893	0.19 Load	52 DegC	236 Mb	195 Pkt	198 Pkt
1754439988	0.21 Load	52 DegC	236 Mb	159 Pkt	158 Pkt
1754439084	0.23 Load	52 DegC	237 Mb	162 Pkt	158 Pkt
1754438179	0.13 Load	52 DegC	237 Mb	314 Pkt	165 Pkt
1754437274	0.18 Load	52 DegC	238 Mb	372 Pkt	159 Pkt
1754436369	0.22 Load	52 DegC	238 Mb	258 Pkt	162 Pkt
1754435464	0.19 Load	52 DegC	192 Mb	161 Pkt	155 Pkt
1754434559	0.26 Load	53 DegC	194 Mb	203 Pkt	151 Pkt
1754433654	0.25 Load	53 DegC	194 Mb	172 Pkt	150 Pkt
1754432748	0.18 Load	52 DegC	196 Mb	152 Pkt	149 Pkt
1754431843	0.18 Load	52 DegC	196 Mb	157 Pkt	154 Pkt
1754430938	0.26 Load	52 DegC	198 Mb	145 Pkt	149 Pkt
1754430034	0.18 Load	52 DegC	197 Mb	142 Pkt	144 Pkt
1754429129	0.19 Load	53 DegC	197 Mb	152 Pkt	155 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)