APRS Track Direct

My position About ☰

reset

BORING Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BORING. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx1h*	Dg1h*	Dgrx1h*
1790640356	12.6 Volt	20 Pkt	10 Pkt	900000 Pkt
1790636756	12.6 Volt	20 Pkt	20 Pkt	821420 Pkt
1790633156	12.6 Volt	10 Pkt	10 Pkt	833330 Pkt
1790629556	12.6 Volt	10 Pkt	10 Pkt	769230 Pkt
1790625956	12.6 Volt	10 Pkt	10 Pkt	882350 Pkt
1790622357	12.6 Volt	10 Pkt	10 Pkt	937500 Pkt
1790618757	12.6 Volt	10 Pkt	0 Pkt	571420 Pkt
1790615157	12.6 Volt	0 Pkt	0 Pkt	600000 Pkt
1790611557	12.6 Volt	0 Pkt	0 Pkt	800000 Pkt
1790607957	12.6 Volt	10 Pkt	0 Pkt	900000 Pkt
1790604357	12.6 Volt	20 Pkt	10 Pkt	680000 Pkt
1790600757	12.6 Volt	20 Pkt	10 Pkt	481480 Pkt
1790597157	12.6 Volt	0 Pkt	0 Pkt	777770 Pkt
1790593557	12.6 Volt	10 Pkt	0 Pkt	562500 Pkt
1790589957	12.6 Volt	10 Pkt	0 Pkt	636360 Pkt
1790586357	12.6 Volt	0 Pkt	0 Pkt	333330 Pkt
1790582758	12.6 Volt	0 Pkt	0 Pkt	600000 Pkt
1790579158	12.6 Volt	0 Pkt	0 Pkt	666660 Pkt
1790575558	12.6 Volt	0 Pkt	0 Pkt	500000 Pkt
1790571958	12.6 Volt	0 Pkt	0 Pkt	500000 Pkt
1790568358	12.6 Volt	0 Pkt	0 Pkt	750000 Pkt
1790564758	12.6 Volt	0 Pkt	0 Pkt	0 Pkt
1790561158	12.6 Volt	0 Pkt	0 Pkt	999990 Pkt
1790555479	12.6 Volt	420 Pkt	190 Pkt	454110 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Dgrx1h: 0, 10, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)