APRS Track Direct

My position About ☰

reset

KR4ISQ-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KR4ISQ-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	InetIn*	RFiGate*	Temp*
1789923965	38 C	10 Pkts	0 Pkts	38 C
1789923361	38 C	6 Pkts	0 Pkts	38 C
1789922759	39 C	4 Pkts	0 Pkts	38 C
1789922163	38 C	5 Pkts	0 Pkts	37 C
1789921563	37 C	14 Pkts	14 Pkts	37 C
1789920963	38 C	30 Pkts	8 Pkts	38 C
1789920367	37 C	31 Pkts	14 Pkts	38 C
1789919767	37 C	28 Pkts	8 Pkts	37 C
1789919162	37 C	24 Pkts	5 Pkts	38 C
1789918561	38 C	3 Pkts	21 Pkts	38 C
1789917961	37 C	39 Pkts	3 Pkts	37 C
1789917358	38 C	99 Pkts	10 Pkts	37 C
1789916761	38 C	46 Pkts	12 Pkts	37 C
1789916160	37 C	23 Pkts	11 Pkts	37 C
1789915560	37 C	15 Pkts	12 Pkts	37 C
1789914958	38 C	4 Pkts	8 Pkts	37 C
1789914360	37 C	9 Pkts	4 Pkts	37 C
1789913768	37 C	12 Pkts	3 Pkts	37 C
1789913170	37 C	9 Pkts	4 Pkts	37 C
1789911359	37 C	5 Pkts	9 Pkts	37 C
1789910755	37 C	24 Pkts	19 Pkts	38 C
1789910154	38 C	40 Pkts	19 Pkts	37 C
1789909559	37 C	48 Pkts	22 Pkts	39 C
1789908958	37 C	33 Pkts	28 Pkts	37 C
1789908360	37 C	18 Pkts	16 Pkts	37 C

*Used Equation Coefficients:

Temp: 0, 1, 0

InetIn: 0, 1, 0

RFiGate: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)