This is the latest recevied telemetry packets stored in our database for station/object SP9UOB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719661489 | 2408 | 9 | 5923 | 712 | 2224 |
1719661413 | 2472 | 10 | 5825 | 1016 | 2264 |
1719661324 | 2376 | 11 | 5923 | 516 | 2200 |
1719661253 | 2432 | 10 | 5825 | 478 | 2288 |
1719661172 | 2408 | 8 | 5814 | 474 | 2256 |
1719661102 | 2504 | 8 | 5869 | 674 | 2320 |
1719661002 | 2424 | 8 | 5847 | 528 | 2216 |
1719660913 | 2504 | 8 | 5869 | 480 | 2208 |
1719660841 | 2504 | 8 | 5913 | 696 | 2232 |
1719660774 | 2528 | 9 | 5836 | 820 | 2216 |
1719660701 | 2512 | 9 | 5814 | 840 | 2200 |
1719660633 | 2440 | 5 | 5880 | 1018 | 2288 |
1719660563 | 2520 | 11 | 6022 | 644 | 2144 |
1719660494 | 2464 | 10 | 6000 | 510 | 2184 |
1719660400 | 2528 | 10 | 5923 | 684 | 2248 |
1719660330 | 2528 | 10 | 6143 | 502 | 2232 |
1719660258 | 2528 | 10 | 5847 | 1070 | 2256 |
1719660187 | 2528 | 11 | 5748 | 648 | 2256 |
1719660118 | 2520 | 9 | 5836 | 874 | 2256 |
1719660049 | 2536 | 9 | 5825 | 760 | 2232 |
1719659978 | 2504 | 10 | 5891 | 852 | 2256 |
1719659888 | 2536 | 10 | 5923 | 1052 | 2272 |
1719659816 | 2536 | 10 | 5836 | 1030 | 2208 |
1719659737 | 2440 | 11 | 5726 | 470 | 2184 |
1719659445 | 2480 | 11 | 5913 | 884 | 2256 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)