This is the latest recevied telemetry packets stored in our database for station/object DA0WW-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU%* | RAM%* | CPU C* | RESV4* | RESV5* |
|---|---|---|---|---|---|
| 1790651844 | 3 % | 12 % | 45 C | 0 # | 0 # |
| 1790646417 | 5 % | 12 % | 43 C | 0 # | 0 # |
| 1790642798 | 4 % | 12 % | 44 C | 0 # | 0 # |
| 1790640989 | 3 % | 12 % | 44 C | 0 # | 0 # |
| 1790639182 | 3 % | 12 % | 43 C | 0 # | 0 # |
| 1790637370 | 3 % | 12 % | 44 C | 0 # | 0 # |
| 1790635562 | 2 % | 12 % | 43 C | 0 # | 0 # |
| 1790633751 | 2 % | 12 % | 45 C | 0 # | 0 # |
| 1790630132 | 2 % | 12 % | 44 C | 0 # | 0 # |
| 1790626515 | 5 % | 12 % | 45 C | 0 # | 0 # |
| 1790624706 | 2 % | 12 % | 45 C | 0 # | 0 # |
| 1790622894 | 5 % | 12 % | 44 C | 0 # | 0 # |
| 1790621086 | 3 % | 12 % | 43 C | 0 # | 0 # |
| 1790619277 | 3 % | 12 % | 45 C | 0 # | 0 # |
| 1790617469 | 3 % | 12 % | 43 C | 0 # | 0 # |
| 1790612038 | 3 % | 12 % | 44 C | 0 # | 0 # |
| 1790606612 | 2 % | 12 % | 44 C | 0 # | 0 # |
| 1790601182 | 5 % | 12 % | 45 C | 0 # | 0 # |
| 1790593943 | 1 % | 12 % | 45 C | 0 # | 0 # |
| 1790592134 | 5 % | 12 % | 44 C | 0 # | 0 # |
| 1790590324 | 4 % | 12 % | 44 C | 0 # | 0 # |
| 1790584896 | 3 % | 12 % | 43 C | 0 # | 0 # |
| 1790583086 | 6 % | 12 % | 44 C | 0 # | 0 # |
| 1790577659 | 2 % | 12 % | 44 C | 0 # | 0 # |
| 1790575848 | 3 % | 12 % | 44 C | 0 # | 0 # |
*Used Equation Coefficients:
CPU%: 0, 1, 0
RAM%: 0, 1, 0
CPU C: 0, 1, -100
RESV4: 0, 1, 0
RESV5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)