This is the latest recevied telemetry packets stored in our database for station/object XE2AD-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794869295 | 25.3 | 37.89 | 0 | 0 | 0 |
| 1794869047 | 25.3 | 38.19 | 0 | 0 | 0 |
| 1794869032 | 25.3 | 38.19 | 0 | 0 | 0 |
| 1794869013 | 25.3 | 38.19 | 0 | 0 | 0 |
| 1794868976 | 25.4 | 37.95 | 0 | 0 | 0 |
| 1794868956 | 25.4 | 37.95 | 0 | 0 | 0 |
| 1794868900 | 25.4 | 38.02 | 0 | 0 | 0 |
| 1794868872 | 25.4 | 38.16 | 0 | 0 | 0 |
| 1794868849 | 25.4 | 38.16 | 0 | 0 | 0 |
| 1794868773 | 25.4 | 37.99 | 0 | 0 | 0 |
| 1794868758 | 25.4 | 37.99 | 0 | 0 | 0 |
| 1794868669 | 25.5 | 37.74 | 0 | 0 | 0 |
| 1794868554 | 25.5 | 37.69 | 0 | 0 | 0 |
| 1794868465 | 25.5 | 38.02 | 0 | 0 | 0 |
| 1794868381 | 25.5 | 37.75 | 0 | 0 | 0 |
| 1794868326 | 25.5 | 37.75 | 0 | 0 | 0 |
| 1794868252 | 25.5 | 37.78 | 810.88 | 0 | 0 |
| 1794868100 | 25.7 | 37.37 | 0 | 0 | 0 |
| 1794867807 | 25.8 | 37.8 | 0 | 0 | 0 |
| 1794867730 | 25.8 | 37.7 | 0 | 0 | 0 |
| 1794867662 | 25.7 | 37.9 | 0 | 0 | 0 |
| 1794867604 | 25.8 | 37.57 | 0 | 0 | 0 |
| 1794867471 | 25.8 | 38.03 | 0 | 0 | 0 |
| 1794867440 | 25.8 | 38.03 | 0 | 0 | 0 |
| 1794867417 | 25.8 | 38.21 | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)