This is the latest recevied telemetry packets stored in our database for station/object SR9SMR-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx10min* | Tx10min* | Digi10min* | Vbatt* | Tempre* |
|---|---|---|---|---|---|
| 1794914906 | 0 Pkt | 1 Pkt | 0 Pkt | 12.44 V | 0 DegC |
| 1794914259 | 0 Pkt | 6 Pkt | 0 Pkt | 12.44 V | 0 DegC |
| 1794913610 | 0 Pkt | 2 Pkt | 0 Pkt | 12.48 V | 0 DegC |
| 1794912958 | 0 Pkt | 1 Pkt | 0 Pkt | 12.48 V | 0 DegC |
| 1794912368 | 0 Pkt | 1 Pkt | 0 Pkt | 12.46 V | 0 DegC |
| 1794911720 | 0 Pkt | 1 Pkt | 0 Pkt | 12.46 V | 0 DegC |
| 1794911072 | 0 Pkt | 1 Pkt | 0 Pkt | 12.46 V | 0 DegC |
| 1794910424 | 0 Pkt | 2 Pkt | 0 Pkt | 12.48 V | 0 DegC |
| 1794909775 | 0 Pkt | 1 Pkt | 0 Pkt | 12.46 V | 0 DegC |
| 1794909127 | 0 Pkt | 1 Pkt | 0 Pkt | 12.46 V | 0 DegC |
| 1794908478 | 0 Pkt | 1 Pkt | 0 Pkt | 12.46 V | 0 DegC |
| 1794907888 | 0 Pkt | 1 Pkt | 0 Pkt | 12.44 V | 0 DegC |
| 1794907239 | 0 Pkt | 2 Pkt | 0 Pkt | 12.46 V | 0 DegC |
| 1794906591 | 0 Pkt | 1 Pkt | 0 Pkt | 12.48 V | 0 DegC |
| 1794905292 | 0 Pkt | 3 Pkt | 0 Pkt | 12.48 V | 0 DegC |
| 1794904626 | 0 Pkt | 1 Pkt | 0 Pkt | 12.48 V | 0 DegC |
| 1794903977 | 0 Pkt | 7 Pkt | 0 Pkt | 12.48 V | 0 DegC |
| 1794903326 | 0 Pkt | 1 Pkt | 0 Pkt | 12.48 V | 0 DegC |
| 1794902676 | 0 Pkt | 1 Pkt | 0 Pkt | 12.48 V | 0 DegC |
| 1794902086 | 0 Pkt | 1 Pkt | 0 Pkt | 12.46 V | 0 DegC |
| 1794901437 | 0 Pkt | 1 Pkt | 0 Pkt | 12.46 V | 0 DegC |
| 1794900789 | 0 Pkt | 2 Pkt | 0 Pkt | 12.44 V | 0 DegC |
| 1794900139 | 0 Pkt | 1 Pkt | 0 Pkt | 12.44 V | 0 DegC |
| 1794899491 | 0 Pkt | 1 Pkt | 0 Pkt | 12.48 V | 0 DegC |
| 1794898843 | 0 Pkt | 1 Pkt | 0 Pkt | 12.48 V | 0 DegC |
*Used Equation Coefficients:
Rx10min: 0, 1, 0
Tx10min: 0, 1, 0
Digi10min: 0, 1, 0
Vbatt: 0, 0.02, 10
Tempre: 0, 0.5, -50
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)