This is the latest recevied telemetry packets stored in our database for station/object 9W2LWK-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766203505 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1766203482 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1766203454 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1766202215 | 3.32 VDC | 0 | 0 | 0 | 0 |
| 1766200409 | 3.92 VDC | 0 | 0 | 0 | 0 |
| 1766200258 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1766200210 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1766200078 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1766200055 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1766200018 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1766199995 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1766199972 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1766199926 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1766199903 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1766199874 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1766199763 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1766199688 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1766199656 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1766199639 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1766199611 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1766199582 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1766121761 | 3.51 VDC | 0 | 0 | 0 | 0 |
| 1766120859 | 3.74 VDC | 0 | 0 | 0 | 0 |
| 1766119955 | 3.79 VDC | 0 | 0 | 0 | 0 |
| 1766119052 | 3.85 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)