This is the latest recevied telemetry packets stored in our database for station/object IW2EJH-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732304172 | 3.79 VDC | 1.78 VDC | 0 | 0 | 0 |
| 1732303272 | 3.79 VDC | 1.74 VDC | 0 | 0 | 0 |
| 1732302372 | 3.8 VDC | 1.72 VDC | 0 | 0 | 0 |
| 1732301472 | 3.81 VDC | 1.74 VDC | 0 | 0 | 0 |
| 1732300572 | 3.81 VDC | 1.78 VDC | 0 | 0 | 0 |
| 1732299672 | 3.75 VDC | 1.66 VDC | 0 | 0 | 0 |
| 1732298772 | 3.82 VDC | 1.74 VDC | 0 | 0 | 0 |
| 1732297875 | 3.79 VDC | 1.68 VDC | 0 | 0 | 0 |
| 1732296969 | 3.82 VDC | 1.72 VDC | 0 | 0 | 0 |
| 1732296069 | 3.83 VDC | 1.74 VDC | 0 | 0 | 0 |
| 1732295169 | 3.84 VDC | 1.76 VDC | 0 | 0 | 0 |
| 1732294268 | 3.84 VDC | 1.76 VDC | 0 | 0 | 0 |
| 1732293368 | 3.85 VDC | 1.78 VDC | 0 | 0 | 0 |
| 1732292468 | 3.85 VDC | 1.74 VDC | 0 | 0 | 0 |
| 1732291568 | 3.86 VDC | 1.76 VDC | 0 | 0 | 0 |
| 1732290668 | 3.85 VDC | 1.78 VDC | 0 | 0 | 0 |
| 1732289768 | 3.87 VDC | 2.04 VDC | 0 | 0 | 0 |
| 1732288868 | 3.84 VDC | 4.14 VDC | 0 | 0 | 0 |
| 1732287968 | 3.89 VDC | 4.26 VDC | 0 | 0 | 0 |
| 1732287068 | 3.9 VDC | 4.24 VDC | 0 | 0 | 0 |
| 1732286168 | 3.91 VDC | 4.22 VDC | 0 | 0 | 0 |
| 1732285268 | 3.92 VDC | 4.24 VDC | 0 | 0 | 0 |
| 1732284368 | 3.93 VDC | 4.3 VDC | 0 | 0 | 0 |
| 1732283470 | 3.9 VDC | 4.2 VDC | 0 | 0 | 0 |
| 1732282568 | 3.97 VDC | 4.32 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)