APRS Track Direct

My position About ☰

reset

2E0XLS-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 2E0XLS-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Battery*	Temp*
1732518212	12.77 Volts	18.29 Deg.C
1732518032	12.77 Volts	18.29 Deg.C
1732517854	12.77 Volts	18.29 Deg.C
1732517672	12.77 Volts	18.78 Deg.C
1732517491	12.77 Volts	18.29 Deg.C
1732517310	12.77 Volts	18.29 Deg.C
1732517130	12.77 Volts	18.78 Deg.C
1732516952	12.77 Volts	18.78 Deg.C
1732516854	12.77 Volts	18.78 Deg.C
1732516673	12.77 Volts	18.78 Deg.C
1732516496	12.77 Volts	18.78 Deg.C
1732516312	12.77 Volts	18.78 Deg.C
1732516133	12.77 Volts	18.78 Deg.C
1732515952	12.77 Volts	19.27 Deg.C
1732515771	12.77 Volts	18.78 Deg.C
1732515591	12.77 Volts	19.27 Deg.C
1732515410	12.77 Volts	19.27 Deg.C
1732515230	12.77 Volts	19.76 Deg.C
1732515049	12.77 Volts	19.27 Deg.C
1732514870	12.77 Volts	19.27 Deg.C
1732514689	12.77 Volts	19.76 Deg.C
1732514509	12.77 Volts	19.76 Deg.C
1732514328	12.8 Volts	19.76 Deg.C
1732514149	12.77 Volts	20.25 Deg.C
1732513967	12.75 Volts	20.74 Deg.C

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Temp: 0, 0.489, -273.15

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)