APRS Track Direct

My position About ☰

reset

IW0QHA-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IW0QHA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1732227660	28 Pkt	190 Pkt	0 Pkt	6.8 Pcnt	63 Pcnt
1732227360	36 Pkt	190 Pkt	1 Pkt	6.8 Pcnt	63 Pcnt
1732227060	31 Pkt	190 Pkt	1 Pkt	6.8 Pcnt	63 Pcnt
1732226760	23 Pkt	180 Pkt	0 Pkt	6.8 Pcnt	63 Pcnt
1732226460	34 Pkt	190 Pkt	0 Pkt	6.8 Pcnt	63 Pcnt
1732226160	32 Pkt	190 Pkt	0 Pkt	6.8 Pcnt	63 Pcnt
1732225860	30 Pkt	200 Pkt	0 Pkt	6.8 Pcnt	63 Pcnt
1732225560	28 Pkt	190 Pkt	1 Pkt	6.8 Pcnt	63 Pcnt
1732225260	28 Pkt	200 Pkt	1 Pkt	6.8 Pcnt	63 Pcnt
1732224960	25 Pkt	190 Pkt	0 Pkt	6.8 Pcnt	63 Pcnt
1732224660	32 Pkt	190 Pkt	0 Pkt	6.8 Pcnt	63 Pcnt
1732224360	26 Pkt	180 Pkt	0 Pkt	6.8 Pcnt	63 Pcnt
1732224060	26 Pkt	170 Pkt	0 Pkt	6.8 Pcnt	63 Pcnt
1732223760	36 Pkt	160 Pkt	3 Pkt	6.8 Pcnt	63 Pcnt
1732223460	36 Pkt	170 Pkt	5 Pkt	6.8 Pcnt	63 Pcnt
1732223160	23 Pkt	160 Pkt	0 Pkt	6.8 Pcnt	63 Pcnt
1732222860	40 Pkt	170 Pkt	0 Pkt	6.8 Pcnt	63 Pcnt
1732222560	37 Pkt	170 Pkt	0 Pkt	6.8 Pcnt	63 Pcnt
1732222260	39 Pkt	170 Pkt	0 Pkt	6.8 Pcnt	63 Pcnt
1732221960	28 Pkt	170 Pkt	1 Pkt	6.8 Pcnt	63 Pcnt
1732221660	17 Pkt	180 Pkt	1 Pkt	6.8 Pcnt	63 Pcnt
1732221360	15 Pkt	190 Pkt	0 Pkt	6.8 Pcnt	63 Pcnt
1732221060	9 Pkt	200 Pkt	0 Pkt	6.8 Pcnt	63 Pcnt
1732220760	11 Pkt	210 Pkt	0 Pkt	6.8 Pcnt	63 Pcnt
1732220460	25 Pkt	230 Pkt	0 Pkt	6.8 Pcnt	63 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)