APRS Track Direct

My position About ☰

reset

SP1RKB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP1RKB. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	Rx1h*	Dg1h*	Eff1h*	Eff*
1732293054	22 C	90 Pkt	10 Pkt	53 Pcnt	57 Pcnt
1732293053	22 C	90 Pkt	10 Pkt	53 Pcnt	57 Pcnt
1732291853	21.5 C	80 Pkt	0 Pkt	49 Pcnt	56 Pcnt
1732290653	21 C	100 Pkt	10 Pkt	52 Pcnt	57 Pcnt
1732289454	20.5 C	90 Pkt	20 Pkt	52 Pcnt	57 Pcnt
1732289453	20.5 C	90 Pkt	20 Pkt	52 Pcnt	57 Pcnt
1732288253	20 C	100 Pkt	20 Pkt	57 Pcnt	57 Pcnt
1732287053	19.5 C	120 Pkt	30 Pkt	65 Pcnt	57 Pcnt
1732285854	19.5 C	110 Pkt	20 Pkt	65 Pcnt	57 Pcnt
1732285853	19.5 C	110 Pkt	20 Pkt	65 Pcnt	57 Pcnt
1732284653	19.5 C	110 Pkt	20 Pkt	63 Pcnt	57 Pcnt
1732283453	19.5 C	80 Pkt	10 Pkt	56 Pcnt	56 Pcnt
1732282254	19.5 C	120 Pkt	30 Pkt	59 Pcnt	56 Pcnt
1732282253	19.5 C	120 Pkt	30 Pkt	59 Pcnt	56 Pcnt
1732281054	19.5 C	170 Pkt	40 Pkt	61 Pcnt	56 Pcnt
1732279853	19.5 C	170 Pkt	40 Pkt	62 Pcnt	56 Pcnt
1732278654	19.5 C	160 Pkt	30 Pkt	60 Pcnt	56 Pcnt
1732278654	19.5 C	160 Pkt	30 Pkt	60 Pcnt	56 Pcnt
1732277454	19.5 C	130 Pkt	20 Pkt	60 Pcnt	55 Pcnt
1732276254	19.5 C	140 Pkt	30 Pkt	62 Pcnt	55 Pcnt
1732275055	19.5 C	100 Pkt	10 Pkt	65 Pcnt	55 Pcnt
1732275054	19.5 C	100 Pkt	10 Pkt	65 Pcnt	55 Pcnt
1732273854	19.5 C	110 Pkt	10 Pkt	64 Pcnt	54 Pcnt
1732272654	20 C	100 Pkt	0 Pkt	54 Pcnt	53 Pcnt
1732271459	20 C	140 Pkt	20 Pkt	50 Pcnt	53 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)