APRS Track Direct

My position About ☰

reset

F5ZPO-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F5ZPO-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274736	12.83 Volt	470 Pkt	80 Pkt	66 Pcnt
1836274586	13.13 Volt	500 Pkt	90 Pkt	66 Pcnt
1836274435	13.13 Volt	470 Pkt	80 Pkt	66 Pcnt
1836274289	13.13 Volt	480 Pkt	90 Pkt	65 Pcnt
1836274136	12.75 Volt	480 Pkt	80 Pkt	67 Pcnt
1762367655	13.13 Volt	120 Pkt	90 Pkt	70 Pcnt
1762367054	13.13 Volt	130 Pkt	90 Pkt	71 Pcnt
1762365252	13.13 Volt	130 Pkt	100 Pkt	66 Pcnt
1762364952	13.13 Volt	130 Pkt	100 Pkt	65 Pcnt
1762364652	13.13 Volt	130 Pkt	100 Pkt	66 Pcnt
1762364351	13.13 Volt	130 Pkt	100 Pkt	67 Pcnt
1762364051	13.13 Volt	130 Pkt	100 Pkt	67 Pcnt
1762363751	13.13 Volt	130 Pkt	100 Pkt	63 Pcnt
1762363451	13.13 Volt	140 Pkt	110 Pkt	61 Pcnt
1762363150	13.13 Volt	140 Pkt	110 Pkt	60 Pcnt
1762362850	13.13 Volt	150 Pkt	110 Pkt	61 Pcnt
1762362249	13.13 Volt	130 Pkt	100 Pkt	55 Pcnt
1762361950	12.9 Volt	130 Pkt	90 Pkt	54 Pcnt
1762361649	13.13 Volt	120 Pkt	90 Pkt	54 Pcnt
1762361348	13.13 Volt	120 Pkt	80 Pkt	51 Pcnt
1762361048	13.13 Volt	110 Pkt	70 Pkt	50 Pcnt
1762360748	13.13 Volt	100 Pkt	60 Pkt	46 Pcnt
1762360448	13.13 Volt	90 Pkt	60 Pkt	44 Pcnt
1762360147	13.13 Volt	80 Pkt	50 Pkt	44 Pcnt
1762359847	13.13 Volt	70 Pkt	40 Pkt	43 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)