This is the latest recevied telemetry packets stored in our database for station/object J41VAA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Avg 10m* | Avg 10m* | RxPkts* | IGateDropRx* | TxPkts* |
---|---|---|---|---|---|
1758266756 | - | - | - | - | - |
1758266676 | 0.04 Rx Erlang | 0.01 Tx Erlang | 37 count/10m | 1 count/10m | 14 count/10m |
1758265707 | - | - | - | - | - |
1758265476 | 0.03 Rx Erlang | 0.01 Tx Erlang | 27 count/10m | 0 count/10m | 14 count/10m |
1758264641 | - | - | - | - | - |
1758264276 | 0.04 Rx Erlang | 0.01 Tx Erlang | 38 count/10m | 0 count/10m | 16 count/10m |
1758263530 | - | - | - | - | - |
1758263076 | 0.04 Rx Erlang | 0.01 Tx Erlang | 34 count/10m | 0 count/10m | 13 count/10m |
1758261891 | - | - | - | - | - |
1758261876 | 0.04 Rx Erlang | 0.01 Tx Erlang | 30 count/10m | 1 count/10m | 12 count/10m |
1758260790 | - | - | - | - | - |
1758260676 | 0.04 Rx Erlang | 0.01 Tx Erlang | 43 count/10m | 5 count/10m | 14 count/10m |
1758259721 | - | - | - | - | - |
1758259476 | 0.03 Rx Erlang | 0.01 Tx Erlang | 25 count/10m | 0 count/10m | 11 count/10m |
1758258690 | - | - | - | - | - |
1758258276 | 0.03 Rx Erlang | 0.01 Tx Erlang | 27 count/10m | 0 count/10m | 10 count/10m |
1758257136 | - | - | - | - | - |
1758257076 | 0.03 Rx Erlang | 0.01 Tx Erlang | 29 count/10m | 2 count/10m | 9 count/10m |
1758256068 | - | - | - | - | - |
1758255876 | 0.03 Rx Erlang | 0.01 Tx Erlang | 25 count/10m | 0 count/10m | 9 count/10m |
1758254963 | - | - | - | - | - |
1758254676 | 0.03 Rx Erlang | 0.01 Tx Erlang | 26 count/10m | 1 count/10m | 7 count/10m |
1758253929 | - | - | - | - | - |
1758253476 | 0.03 Rx Erlang | 0.01 Tx Erlang | 33 count/10m | 0 count/10m | 8 count/10m |
1758252825 | - | - | - | - | - |
*Used Equation Coefficients:
Avg 10m: 0, 0.005, 0
Avg 10m: 0, 0.005, 0
RxPkts: 0, 1, 0
IGateDropRx: 0, 1, 0
TxPkts: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)