APRS Track Direct

My position About ☰

reset

SR5TM-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR5TM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	RxTraffic*	RSSI*	Voltage*
1790606139	67 Pkt	-48 dBm	14.07 V
1790605507	91 Pkt	-49 dBm	14.09 V
1790604870	69 Pkt	-50 dBm	14.07 V
1790604237	90 Pkt	-48 dBm	14.09 V
1790603599	93 Pkt	-48 dBm	14.09 V
1790602966	62 Pkt	-51 dBm	14.07 V
1790602335	76 Pkt	-46 dBm	14.09 V
1790601701	55 Pkt	-46 dBm	14.07 V
1790601071	60 Pkt	-46 dBm	14.07 V
1790600437	42 Pkt	-48 dBm	14.09 V
1790599808	59 Pkt	-53 dBm	14.09 V
1790599175	55 Pkt	-46 dBm	14.09 V
1790598542	51 Pkt	-46 dBm	14.09 V
1790597911	56 Pkt	-52 dBm	14.13 V
1790597281	59 Pkt	-51 dBm	14.07 V
1790596651	4 Pkt	-47 dBm	14.09 V
1790596330	91 Pkt	-50 dBm	14.09 V
1790595695	134 Pkt	-46 dBm	14.07 V
1790595053	77 Pkt	-45 dBm	14.07 V
1790594421	53 Pkt	-41 dBm	14.09 V
1790593790	53 Pkt	-45 dBm	14.09 V
1790593159	78 Pkt	-45 dBm	14.07 V
1790592525	90 Pkt	-48 dBm	14.09 V
1790591900	7 Pkt	-43 dBm	14.09 V
1790586442	58 Pkt	-53 dBm	14.07 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)