APRS Track Direct

My position About ☰

reset

VK4RDL-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RDL-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	BATT*	Rx1h*	Dg1h*	Eff1h*
1836274680	14.3 Volt	140 Pkt	80 Pkt	46 Pcnt
1770380085	13.19 Volt	120 Pkt	70 Pkt	47 Pcnt
1770379184	13.19 Volt	130 Pkt	80 Pkt	49 Pcnt
1770378283	13.19 Volt	120 Pkt	70 Pkt	50 Pcnt
1770377382	13.19 Volt	120 Pkt	60 Pkt	52 Pcnt
1770376482	13.19 Volt	110 Pkt	60 Pkt	53 Pcnt
1770375580	13.19 Volt	110 Pkt	50 Pkt	53 Pcnt
1770374679	13.19 Volt	110 Pkt	50 Pkt	50 Pcnt
1770373779	13.19 Volt	100 Pkt	50 Pkt	47 Pcnt
1770372878	13.19 Volt	110 Pkt	50 Pkt	47 Pcnt
1770371977	13.27 Volt	100 Pkt	50 Pkt	45 Pcnt
1770369275	13.19 Volt	100 Pkt	40 Pkt	49 Pcnt
1770362068	14.14 Volt	90 Pkt	40 Pkt	53 Pcnt
1770361167	14.14 Volt	90 Pkt	40 Pkt	57 Pcnt
1770358464	14.14 Volt	110 Pkt	40 Pkt	68 Pcnt
1770357562	14.14 Volt	100 Pkt	40 Pkt	65 Pcnt
1770354861	14.06 Volt	100 Pkt	40 Pkt	58 Pcnt
1770353960	14.22 Volt	110 Pkt	40 Pkt	58 Pcnt
1770353059	14.54 Volt	110 Pkt	40 Pkt	62 Pcnt
1770352158	14.3 Volt	100 Pkt	30 Pkt	60 Pcnt
1770351257	14.22 Volt	100 Pkt	40 Pkt	62 Pcnt
1770349456	14.14 Volt	100 Pkt	40 Pkt	64 Pcnt
1770348555	14.22 Volt	100 Pkt	40 Pkt	67 Pcnt
1770346753	14.22 Volt	100 Pkt	40 Pkt	66 Pcnt
1770345852	13.67 Volt	100 Pkt	40 Pkt	64 Pcnt

*Used Equation Coefficients:

BATT: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)