APRS Track Direct

My position About ☰

reset

PINAL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PINAL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	V_Batt*	V_Ext*	RX_rate*	RelRate*	DrpRate*
1790648850	4.28 VDC	13.12 VDC	1362 pkt/h	210 pkt/h	1152 pkt/h
1790648250	4.28 VDC	13.12 VDC	1242 pkt/h	216 pkt/h	1026 pkt/h
1790647650	4.28 VDC	13.12 VDC	948 pkt/h	156 pkt/h	792 pkt/h
1790647056	4.28 VDC	13.12 VDC	1541 pkt/h	330 pkt/h	1212 pkt/h
1790646449	4.28 VDC	13.14 VDC	1074 pkt/h	228 pkt/h	846 pkt/h
1790645849	4.28 VDC	13.12 VDC	858 pkt/h	162 pkt/h	696 pkt/h
1790645249	4.28 VDC	13.14 VDC	1332 pkt/h	234 pkt/h	1098 pkt/h
1790644649	4.28 VDC	13.14 VDC	1146 pkt/h	168 pkt/h	978 pkt/h
1790644049	4.29 VDC	13.14 VDC	1049 pkt/h	189 pkt/h	860 pkt/h
1790643437	4.27 VDC	13.12 VDC	0 pkt/h	0 pkt/h	0 pkt/h
1790642856	4.28 VDC	13.14 VDC	1194 pkt/h	192 pkt/h	1002 pkt/h
1790642256	4.28 VDC	13.14 VDC	1380 pkt/h	234 pkt/h	1146 pkt/h
1790641655	4.28 VDC	13.14 VDC	996 pkt/h	162 pkt/h	834 pkt/h
1790641055	4.28 VDC	13.14 VDC	930 pkt/h	156 pkt/h	774 pkt/h
1790640455	4.27 VDC	13.14 VDC	960 pkt/h	186 pkt/h	774 pkt/h
1790639855	4.28 VDC	13.16 VDC	1080 pkt/h	252 pkt/h	828 pkt/h
1790639254	4.28 VDC	13.16 VDC	978 pkt/h	186 pkt/h	792 pkt/h
1790638654	4.28 VDC	13.18 VDC	468 pkt/h	96 pkt/h	372 pkt/h
1790638054	4.28 VDC	13.2 VDC	558 pkt/h	102 pkt/h	456 pkt/h
1790637454	4.28 VDC	13.28 VDC	708 pkt/h	114 pkt/h	594 pkt/h
1790636854	4.28 VDC	13.32 VDC	1044 pkt/h	186 pkt/h	858 pkt/h
1790636253	4.28 VDC	13.4 VDC	1164 pkt/h	228 pkt/h	936 pkt/h
1790635653	4.27 VDC	13.46 VDC	852 pkt/h	144 pkt/h	708 pkt/h
1790635053	4.28 VDC	13.54 VDC	732 pkt/h	138 pkt/h	594 pkt/h
1790634453	4.28 VDC	13.54 VDC	654 pkt/h	114 pkt/h	540 pkt/h

*Used Equation Coefficients:

V_Batt: 0, 0.01, 0

V_Ext: 0, 0.02, 0

RX_rate: 0, 1, 0

RelRate: 0, 1, 0

DrpRate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)