This is the latest recevied telemetry packets stored in our database for station/object MB7UKB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU* | Used* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1745057806 | 44 C | 404 MB | 0 | 0 | 0 |
| 1745056006 | 44 C | 403 MB | 0 | 0 | 0 |
| 1745054207 | 44 C | 404 MB | 0 | 0 | 0 |
| 1745052407 | 44 C | 401 MB | 0 | 0 | 0 |
| 1745050606 | 44 C | 403 MB | 0 | 0 | 0 |
| 1745048807 | 44 C | 404 MB | 0 | 0 | 0 |
| 1745047007 | 44 C | 406 MB | 0 | 0 | 0 |
| 1745045207 | 43.47 C | 405 MB | 0 | 0 | 0 |
| 1745043406 | 45.08 C | 373 MB | 0 | 0 | 0 |
| 1745041607 | 44.54 C | 396 MB | 0 | 0 | 0 |
| 1745039746 | 43.47 C | 267 MB | 0 | 0 | 0 |
| 1745037946 | 43.47 C | 267 MB | 0 | 0 | 0 |
| 1745036145 | 43.47 C | 267 MB | 0 | 0 | 0 |
| 1745034346 | 44 C | 267 MB | 0 | 0 | 0 |
| 1745032546 | 43.47 C | 265 MB | 0 | 0 | 0 |
| 1745030745 | 44 C | 267 MB | 0 | 0 | 0 |
| 1745028946 | 44 C | 268 MB | 0 | 0 | 0 |
*Used Equation Coefficients:
CPU: 0, 0.01, 0
Used: 0, 1, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)