APRS Track Direct

My position About ☰

reset

N4LMC-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N4LMC-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1732290124	0.05 Rx Erlang	0.02 Tx Erlang	47 count/10m	1 count/10m	22 count/10m
1732288924	0.05 Rx Erlang	0.02 Tx Erlang	44 count/10m	0 count/10m	16 count/10m
1732287724	0.05 Rx Erlang	0.02 Tx Erlang	49 count/10m	0 count/10m	18 count/10m
1732286524	0.04 Rx Erlang	0.02 Tx Erlang	41 count/10m	0 count/10m	17 count/10m
1732285325	0.05 Rx Erlang	0.02 Tx Erlang	51 count/10m	3 count/10m	18 count/10m
1732284124	0.05 Rx Erlang	0.02 Tx Erlang	54 count/10m	1 count/10m	24 count/10m
1732282924	0.05 Rx Erlang	0.02 Tx Erlang	55 count/10m	0 count/10m	18 count/10m
1732281724	0.06 Rx Erlang	0.02 Tx Erlang	68 count/10m	0 count/10m	27 count/10m
1732280524	0.06 Rx Erlang	0.02 Tx Erlang	56 count/10m	0 count/10m	22 count/10m
1732279324	0.05 Rx Erlang	0.02 Tx Erlang	47 count/10m	0 count/10m	16 count/10m
1732278124	0.05 Rx Erlang	0.02 Tx Erlang	49 count/10m	0 count/10m	18 count/10m
1732276924	0.04 Rx Erlang	0.03 Tx Erlang	48 count/10m	0 count/10m	23 count/10m
1732275724	0.04 Rx Erlang	0.02 Tx Erlang	41 count/10m	0 count/10m	18 count/10m
1732274524	0.04 Rx Erlang	0.01 Tx Erlang	38 count/10m	0 count/10m	13 count/10m
1732273324	0.06 Rx Erlang	0.02 Tx Erlang	51 count/10m	0 count/10m	17 count/10m
1732272124	0.04 Rx Erlang	0.02 Tx Erlang	42 count/10m	0 count/10m	15 count/10m
1732270924	0.05 Rx Erlang	0.02 Tx Erlang	43 count/10m	0 count/10m	16 count/10m
1732269724	0.06 Rx Erlang	0.02 Tx Erlang	46 count/10m	0 count/10m	17 count/10m
1732268524	0.05 Rx Erlang	0.02 Tx Erlang	48 count/10m	0 count/10m	14 count/10m
1732267324	0.06 Rx Erlang	0.02 Tx Erlang	47 count/10m	0 count/10m	18 count/10m
1732266124	0.05 Rx Erlang	0.02 Tx Erlang	53 count/10m	0 count/10m	19 count/10m
1732264924	0.05 Rx Erlang	0.02 Tx Erlang	49 count/10m	0 count/10m	15 count/10m
1732263724	0.06 Rx Erlang	0.02 Tx Erlang	54 count/10m	0 count/10m	18 count/10m
1732262524	0.05 Rx Erlang	0.02 Tx Erlang	53 count/10m	0 count/10m	18 count/10m
1732261324	0.04 Rx Erlang	0.01 Tx Erlang	40 count/10m	0 count/10m	14 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)