This is the latest recevied telemetry packets stored in our database for station/object DB5COA-20. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1744463654 | 994.6 hPa | 28 C deg | 21.4 % | 1009.4 hPa | 0 C deg |
| 1744461854 | 995.3 hPa | 27.9 C deg | 21.5 % | 1010 hPa | 0 C deg |
| 1744460054 | 995.9 hPa | 28 C deg | 21.4 % | 1010.6 hPa | 0 C deg |
| 1744458254 | 996.3 hPa | 28 C deg | 21.3 % | 1011.1 hPa | 0 C deg |
| 1744456454 | 996.6 hPa | 27.7 C deg | 21.5 % | 1011.4 hPa | 0 C deg |
| 1744452854 | 997.3 hPa | 28 C deg | 21.3 % | 1012.1 hPa | 0 C deg |
| 1744451053 | 997.8 hPa | 27.8 C deg | 21.4 % | 1012.6 hPa | 0 C deg |
| 1744449253 | 998 hPa | 27.8 C deg | 21.4 % | 1012.8 hPa | 0 C deg |
| 1744447453 | 998.1 hPa | 27.8 C deg | 21.5 % | 1012.9 hPa | 0 C deg |
| 1744445652 | 998.2 hPa | 27.8 C deg | 21.4 % | 1013 hPa | 0 C deg |
| 1744443852 | 998.5 hPa | 27.7 C deg | 21.5 % | 1013.3 hPa | 0 C deg |
| 1744442052 | 998.8 hPa | 27.7 C deg | 21.5 % | 1013.6 hPa | 0 C deg |
| 1744440252 | 999.2 hPa | 28 C deg | 21.3 % | 1014 hPa | 0 C deg |
| 1744438452 | 999.4 hPa | 28.1 C deg | 21.3 % | 1014.2 hPa | 0 C deg |
| 1744436652 | 999.5 hPa | 28 C deg | 21.3 % | 1014.3 hPa | 0 C deg |
| 1744434852 | 999.4 hPa | 28 C deg | 21.4 % | 1014.2 hPa | 0 C deg |
| 1744433052 | 999.6 hPa | 27.9 C deg | 21.5 % | 1014.4 hPa | 0 C deg |
| 1744431252 | 999.5 hPa | 27.9 C deg | 21.4 % | 1014.4 hPa | 0 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)