This is the latest recevied telemetry packets stored in our database for station/object AE4BA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Load* | CPUTemp* | MemUsed* | DiskUsed* | SwapUsed* |
|---|---|---|---|---|---|
| 1790639354 | 0.04 x50 | 49 C | 27 % | 30 % | 32 % |
| 1790638754 | 0.12 x50 | 44 C | 27 % | 30 % | 32 % |
| 1790638154 | 0.2 x50 | 48 C | 27 % | 30 % | 32 % |
| 1790637554 | 0.5 x50 | 48 C | 28 % | 30 % | 31 % |
| 1790636954 | 0.34 x50 | 48 C | 28 % | 30 % | 31 % |
| 1790636354 | 0.18 x50 | 44 C | 27 % | 30 % | 31 % |
| 1790635754 | 0.16 x50 | 43 C | 28 % | 30 % | 31 % |
| 1790635154 | 0.24 x50 | 48 C | 28 % | 30 % | 31 % |
| 1790634554 | 0.06 x50 | 44 C | 28 % | 30 % | 31 % |
| 1790633954 | 0.12 x50 | 49 C | 28 % | 30 % | 31 % |
| 1790633354 | 0.4 x50 | 48 C | 27 % | 30 % | 31 % |
| 1790632754 | 0.4 x50 | 43 C | 27 % | 30 % | 31 % |
| 1790632154 | 0.12 x50 | 44 C | 28 % | 30 % | 31 % |
| 1790631554 | 0.2 x50 | 44 C | 28 % | 30 % | 31 % |
| 1790630954 | 0.18 x50 | 49 C | 28 % | 30 % | 31 % |
| 1790630354 | 0.24 x50 | 47 C | 28 % | 30 % | 31 % |
| 1790629754 | 0.2 x50 | 50 C | 28 % | 30 % | 31 % |
| 1790629154 | 0.16 x50 | 43 C | 28 % | 30 % | 31 % |
| 1790628554 | 0.16 x50 | 51 C | 28 % | 30 % | 31 % |
| 1790627954 | 0.16 x50 | 43 C | 28 % | 30 % | 31 % |
| 1790627354 | 0.2 x50 | 43 C | 28 % | 30 % | 31 % |
| 1790626754 | 0.28 x50 | 47 C | 28 % | 30 % | 31 % |
| 1790626154 | 0.28 x50 | 44 C | 28 % | 30 % | 31 % |
| 1790625554 | 0.04 x50 | 47 C | 28 % | 30 % | 31 % |
| 1790624954 | 0.02 x50 | 47 C | 28 % | 30 % | 31 % |
*Used Equation Coefficients:
Load: 0, 0.02, 0
CPUTemp: 0, 1, 0
MemUsed: 0, 1, 0
DiskUsed: 0, 1, 0
SwapUsed: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)