This is the latest recevied telemetry packets stored in our database for station/object VU3CAM-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RSSI* | FreeHeap* | Uptime* | OKSend* | FailSend* |
|---|---|---|---|---|---|
| 1790641516 | -61 dBm | 12 KB | 72 min | 15 cnt | 1 cnt |
| 1790641216 | -59 dBm | 12 KB | 67 min | 14 cnt | 1 cnt |
| 1790640916 | -61 dBm | 12 KB | 62 min | 13 cnt | 1 cnt |
| 1790640616 | -61 dBm | 12 KB | 57 min | 12 cnt | 1 cnt |
| 1790640316 | -59 dBm | 12 KB | 52 min | 11 cnt | 1 cnt |
| 1790640016 | -60 dBm | 12 KB | 47 min | 10 cnt | 1 cnt |
| 1790639716 | -62 dBm | 12 KB | 42 min | 9 cnt | 1 cnt |
| 1790639416 | -60 dBm | 12 KB | 37 min | 8 cnt | 1 cnt |
| 1790639116 | -59 dBm | 12 KB | 32 min | 7 cnt | 1 cnt |
| 1790638816 | -59 dBm | 12 KB | 27 min | 6 cnt | 1 cnt |
| 1790638516 | -60 dBm | 12 KB | 22 min | 5 cnt | 1 cnt |
| 1790638216 | -59 dBm | 12 KB | 17 min | 4 cnt | 1 cnt |
| 1790637916 | -59 dBm | 12 KB | 12 min | 3 cnt | 1 cnt |
| 1790637616 | -59 dBm | 12 KB | 7 min | 2 cnt | 1 cnt |
| 1790637316 | -61 dBm | 13 KB | 2 min | 1 cnt | 1 cnt |
| 1790636767 | -61 dBm | 12 KB | 645 min | 129 cnt | 0 cnt |
| 1790636468 | -61 dBm | 12 KB | 640 min | 128 cnt | 0 cnt |
| 1790636168 | -61 dBm | 12 KB | 635 min | 127 cnt | 0 cnt |
| 1790635867 | -60 dBm | 12 KB | 630 min | 126 cnt | 0 cnt |
| 1790635568 | -59 dBm | 12 KB | 625 min | 125 cnt | 0 cnt |
| 1790635268 | -60 dBm | 12 KB | 620 min | 124 cnt | 0 cnt |
| 1790634968 | -62 dBm | 12 KB | 615 min | 123 cnt | 0 cnt |
| 1790634668 | -61 dBm | 12 KB | 610 min | 122 cnt | 0 cnt |
| 1790634368 | -58 dBm | 12 KB | 605 min | 121 cnt | 0 cnt |
| 1790634068 | -58 dBm | 12 KB | 600 min | 120 cnt | 0 cnt |
*Used Equation Coefficients:
RSSI: 0, 1, 0
FreeHeap: 0, 1, 0
Uptime: 0, 1, 0
OKSend: 0, 1, 0
FailSend: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)