This is the latest recevied telemetry packets stored in our database for station/object SA3MHZ-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1791738165 | 36.7 C | 29.84 % | 0 | 0 | 0 |
| 1791738053 | 37 C | 29.47 % | 0 | 0 | 0 |
| 1791738035 | 37 C | 29.47 % | 0 | 0 | 0 |
| 1791737950 | 37.2 C | 29.43 % | 0 | 0 | 0 |
| 1791737930 | 37.2 C | 29.43 % | 0 | 0 | 0 |
| 1791737879 | 37.3 C | 29.47 % | 0 | 0 | 0 |
| 1791737803 | 37.4 C | 29.88 % | 0 | 0 | 0 |
| 1791737787 | 37.4 C | 29.88 % | 0 | 0 | 0 |
| 1791737711 | 37.6 C | 30.28 % | 0 | 0 | 0 |
| 1791737633 | 37.6 C | 30.78 % | 0 | 0 | 0 |
| 1791737537 | 37.6 C | 30.92 % | 0 | 0 | 0 |
| 1791737520 | 37.6 C | 30.92 % | 0 | 0 | 0 |
| 1791737504 | 37.6 C | 30.92 % | 0 | 0 | 0 |
| 1791737488 | 37.6 C | 30.92 % | 0 | 0 | 0 |
| 1791737467 | 37.7 C | 30.94 % | 0 | 0 | 0 |
| 1791737441 | 37.7 C | 30.94 % | 0 | 0 | 0 |
| 1791737424 | 37.7 C | 30.94 % | 0 | 0 | 0 |
| 1791737407 | 37.7 C | 31.02 % | 0 | 0 | 0 |
| 1791737391 | 37.7 C | 31.02 % | 0 | 0 | 0 |
| 1791737372 | 37.7 C | 31.02 % | 0 | 0 | 0 |
| 1791737290 | 37.8 C | 31 % | 0 | 0 | 0 |
| 1791737165 | 37.8 C | 30.74 % | 0 | 0 | 0 |
| 1791737149 | 37.8 C | 30.74 % | 0 | 0 | 0 |
| 1791737127 | 37.8 C | 30.74 % | 0 | 0 | 0 |
| 1791737107 | 37.8 C | 30.74 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)