APRS Track Direct

My position About ☰

reset

SR9WXY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9WXY. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10min*	Tx10min*	Digi10min*	Tempre*
1786736104	61 Pkt	5 Pkt	2 Pkt	33 DegC
1786735504	62 Pkt	6 Pkt	4 Pkt	33 DegC
1786734904	71 Pkt	4 Pkt	2 Pkt	33 DegC
1786733773	111 Pkt	13 Pkt	7 Pkt	33.5 DegC
1786733164	80 Pkt	8 Pkt	5 Pkt	33.5 DegC
1786732562	84 Pkt	6 Pkt	4 Pkt	33.5 DegC
1786731961	96 Pkt	9 Pkt	6 Pkt	33.5 DegC
1786731359	90 Pkt	8 Pkt	5 Pkt	33.5 DegC
1786730759	84 Pkt	9 Pkt	6 Pkt	34 DegC
1786730159	101 Pkt	7 Pkt	6 Pkt	34 DegC
1786729559	105 Pkt	8 Pkt	5 Pkt	34 DegC
1786728961	84 Pkt	7 Pkt	5 Pkt	34 DegC
1786728358	84 Pkt	4 Pkt	1 Pkt	34 DegC
1786727758	93 Pkt	3 Pkt	1 Pkt	34.5 DegC
1786727158	83 Pkt	6 Pkt	3 Pkt	34.5 DegC
1786726558	118 Pkt	6 Pkt	3 Pkt	34.5 DegC
1786725956	96 Pkt	7 Pkt	5 Pkt	34.5 DegC
1786725355	87 Pkt	6 Pkt	3 Pkt	35 DegC
1786724753	80 Pkt	10 Pkt	4 Pkt	35 DegC
1786724144	74 Pkt	6 Pkt	3 Pkt	35 DegC
1786723544	77 Pkt	5 Pkt	3 Pkt	35 DegC
1786722944	70 Pkt	9 Pkt	6 Pkt	35 DegC
1786722344	99 Pkt	6 Pkt	3 Pkt	35 DegC
1786721745	81 Pkt	15 Pkt	12 Pkt	35 DegC
1786721145	77 Pkt	4 Pkt	2 Pkt	35 DegC

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Tx10min: 0, 1, 0

Digi10min: 0, 1, 0

HostTx10m: 0, 1, 0

Tempre: 0, 0.5, -50

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)