APRS Track Direct

My position About ☰

reset

AD3O-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AD3O-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1790638238	13.9 Volt	720 Pkt	130 Pkt	66 Pcnt
1790634459	13.75 Volt	710 Pkt	160 Pkt	64 Pcnt
1790630680	13.9 Volt	630 Pkt	130 Pkt	62 Pcnt
1790626899	13.9 Volt	720 Pkt	130 Pkt	64 Pcnt
1790623120	13.9 Volt	660 Pkt	130 Pkt	62 Pcnt
1790619340	13.9 Volt	730 Pkt	150 Pkt	67 Pcnt
1790615559	13.9 Volt	780 Pkt	160 Pkt	68 Pcnt
1790611781	13.9 Volt	670 Pkt	160 Pkt	61 Pcnt
1790608000	13.9 Volt	710 Pkt	150 Pkt	67 Pcnt
1790604219	13.9 Volt	690 Pkt	140 Pkt	65 Pcnt
1790600440	13.9 Volt	630 Pkt	140 Pkt	67 Pcnt
1790596659	13.9 Volt	690 Pkt	140 Pkt	67 Pcnt
1790592880	13.9 Volt	690 Pkt	140 Pkt	68 Pcnt
1790589100	13.9 Volt	600 Pkt	110 Pkt	66 Pcnt
1790585322	13.9 Volt	610 Pkt	110 Pkt	70 Pcnt
1790581541	13.9 Volt	670 Pkt	140 Pkt	68 Pcnt
1790577762	13.9 Volt	610 Pkt	110 Pkt	69 Pcnt
1790573982	13.9 Volt	610 Pkt	120 Pkt	67 Pcnt
1790570201	13.9 Volt	650 Pkt	130 Pkt	70 Pcnt
1790566421	13.9 Volt	530 Pkt	110 Pkt	68 Pcnt
1790562642	13.9 Volt	560 Pkt	110 Pkt	65 Pcnt
1790558860	13.9 Volt	580 Pkt	120 Pkt	66 Pcnt
1790555083	13.9 Volt	610 Pkt	130 Pkt	64 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)