This is the latest recevied telemetry packets stored in our database for station/object EC1CS-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732305636 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1732303836 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1732302035 | 4.15 VDC | 0 | 0 | 0 | 0 |
| 1732300235 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 1732298435 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 1732296634 | 4.17 VDC | 0 | 0 | 0 | 0 |
| 1732294834 | 4.19 VDC | 0 | 0 | 0 | 0 |
| 1732293034 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1732291233 | 4.23 VDC | 0 | 0 | 0 | 0 |
| 1732289433 | 4.28 VDC | 0 | 0 | 0 | 0 |
| 1732287633 | 4.24 VDC | 0 | 0 | 0 | 0 |
| 1732285834 | 4.3 VDC | 0 | 0 | 0 | 0 |
| 1732284032 | 4.25 VDC | 0 | 0 | 0 | 0 |
| 1732282231 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1732280431 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1732278631 | 4.2 VDC | 0 | 0 | 0 | 0 |
| 1732276836 | 4.16 VDC | 0 | 0 | 0 | 0 |
| 1732275032 | 4.11 VDC | 0 | 0 | 0 | 0 |
| 1732273229 | 4.07 VDC | 0 | 0 | 0 | 0 |
| 1732271431 | 4.01 VDC | 0 | 0 | 0 | 0 |
| 1732269629 | 3.98 VDC | 0 | 0 | 0 | 0 |
| 1732267829 | 3.92 VDC | 0 | 0 | 0 | 0 |
| 1732266028 | 3.75 VDC | 0 | 0 | 0 | 0 |
| 1732264227 | 2.89 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)