APRS Track Direct

My position About ☰

reset

E22KKC-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E22KKC-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1749315598	25 Pkt	0 Pkt	-45 dBm	0.08 V
1749313772	29 Pkt	0 Pkt	-42 dBm	0.08 V
1749311947	22 Pkt	2 Pkt	-50 dBm	0.08 V
1749310121	30 Pkt	0 Pkt	-50 dBm	0.08 V
1749308295	20 Pkt	0 Pkt	-51 dBm	0.08 V
1749306469	80 Pkt	3 Pkt	-48 dBm	0.08 V
1749304643	22 Pkt	0 Pkt	-48 dBm	0.08 V
1749302817	11 Pkt	0 Pkt	-48 dBm	0.08 V
1749300991	22 Pkt	0 Pkt	-47 dBm	0.08 V
1749299166	22 Pkt	0 Pkt	-47 dBm	0.08 V
1749297340	32 Pkt	0 Pkt	-44 dBm	0.08 V
1749295515	38 Pkt	0 Pkt	-47 dBm	0.08 V
1749293689	13 Pkt	0 Pkt	-47 dBm	0.08 V
1749291864	18 Pkt	0 Pkt	-47 dBm	0.08 V
1749290038	10 Pkt	0 Pkt	-48 dBm	0.08 V
1749288212	9 Pkt	5 Pkt	-41 dBm	0.08 V
1749286387	8 Pkt	0 Pkt	-47 dBm	0.08 V
1749284561	5 Pkt	0 Pkt	-46 dBm	0.08 V
1749282736	5 Pkt	0 Pkt	-49 dBm	0.08 V
1749280911	0 Pkt	0 Pkt	-50 dBm	0.08 V
1749279011	4 Pkt	0 Pkt	-52 dBm	0.08 V
1749277186	9 Pkt	0 Pkt	-51 dBm	0.08 V
1749275361	8 Pkt	0 Pkt	-53 dBm	0.08 V
1749273535	6 Pkt	0 Pkt	-52 dBm	0.08 V
1749271710	13 Pkt	0 Pkt	-52 dBm	0.08 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)