This is the latest recevied telemetry packets stored in our database for station/object ER-DB0ELR. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1753807893 | 0 | 13 | 0 | 1 | 0 |
| 1753807293 | 0 | 13 | 0 | 2 | 0 |
| 1753806693 | 0 | 364 | 0 | 2 | 0 |
| 1753806093 | 1 | 40 | 1 | 2 | 0 |
| 1753805493 | 0 | 13 | 0 | 1 | 0 |
| 1753804893 | 0 | 17 | 0 | 2 | 0 |
| 1753804293 | 0 | 44 | 0 | 3 | 0 |
| 1753803693 | 0 | 70 | 0 | 2 | 0 |
| 1753803093 | 0 | 454 | 0 | 2 | 0 |
| 1753802493 | 0 | 999 | 0 | 1 | 0 |
| 1753801893 | 1 | 850 | 1 | 1 | 0 |
| 1753801293 | 0 | 17 | 0 | 1 | 0 |
| 1753800693 | 0 | 13 | 0 | 2 | 0 |
| 1753800093 | 0 | 40 | 0 | 2 | 0 |
| 1753799493 | 0 | 58 | 0 | 2 | 0 |
| 1753798893 | 0 | 40 | 0 | 2 | 0 |
| 1753798293 | 0 | 97 | 0 | 3 | 0 |
| 1753797693 | 0 | 17 | 0 | 1 | 0 |
| 1753797093 | 0 | 13 | 0 | 1 | 0 |
| 1753796493 | 0 | 13 | 0 | 1 | 0 |
| 1753795893 | 0 | 13 | 0 | 1 | 0 |
| 1753795293 | 0 | 39 | 0 | 3 | 0 |
| 1753794693 | 0 | 43 | 0 | 2 | 0 |
| 1753794093 | 0 | 17 | 0 | 2 | 0 |
| 1753793493 | 0 | 192 | 0 | 2 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)