This is the latest recevied telemetry packets stored in our database for station/object DK4RS-20. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | press* | temp.in* | hum* | QNH* | temp.out* |
|---|---|---|---|---|---|
| 1741882564 | 984.8 hPa | 25.9 C deg | 38.1 % | 999.6 hPa | 0 C deg |
| 1741880764 | 984.4 hPa | 25.8 C deg | 38 % | 999.2 hPa | 0 C deg |
| 1741878964 | 984.2 hPa | 25.9 C deg | 38 % | 999 hPa | 0 C deg |
| 1741877164 | 983.8 hPa | 26 C deg | 38 % | 998.6 hPa | 0 C deg |
| 1741875364 | 983.3 hPa | 26.1 C deg | 38 % | 998.1 hPa | 0 C deg |
| 1741873564 | 982.9 hPa | 26 C deg | 37.9 % | 997.7 hPa | 0 C deg |
| 1741871764 | 982.9 hPa | 26 C deg | 37.8 % | 997.6 hPa | 0 C deg |
| 1741869964 | 982.7 hPa | 26.4 C deg | 37.7 % | 997.4 hPa | 0 C deg |
| 1741868164 | 982.9 hPa | 26.3 C deg | 37.8 % | 997.7 hPa | 0 C deg |
| 1741866363 | 983 hPa | 26.5 C deg | 37.7 % | 997.7 hPa | 0 C deg |
| 1741864563 | 982.8 hPa | 26.6 C deg | 37.8 % | 997.5 hPa | 0 C deg |
| 1741862763 | 982.6 hPa | 26.8 C deg | 37.9 % | 997.4 hPa | 0 C deg |
| 1741860963 | 982.6 hPa | 27.1 C deg | 37.9 % | 997.3 hPa | 0 C deg |
| 1741859163 | 982.5 hPa | 27.6 C deg | 37.9 % | 997.2 hPa | 0 C deg |
| 1741857362 | 982.8 hPa | 27.5 C deg | 38 % | 997.5 hPa | 0 C deg |
| 1741855562 | 982.8 hPa | 27.1 C deg | 38.1 % | 997.5 hPa | 0 C deg |
| 1741853762 | 982.7 hPa | 26.5 C deg | 38.1 % | 997.5 hPa | 0 C deg |
| 1741851962 | 982.8 hPa | 26 C deg | 38.1 % | 997.6 hPa | 0 C deg |
| 1741850162 | 982.9 hPa | 25.5 C deg | 38.1 % | 997.7 hPa | 0 C deg |
| 1741848362 | 982.6 hPa | 24.8 C deg | 38.1 % | 997.4 hPa | 0 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
QNH: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)