APRS Track Direct

My position About ☰

reset

ON0LB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ON0LB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Effto*
1732366306	12.88 Volt	1010 Pkt	470 Pkt	72 Pcnt	63 Pcnt
1732365705	12.88 Volt	990 Pkt	460 Pkt	72 Pcnt	63 Pcnt
1732365105	12.88 Volt	970 Pkt	450 Pkt	73 Pcnt	63 Pcnt
1732364504	12.88 Volt	920 Pkt	410 Pkt	72 Pcnt	63 Pcnt
1732363903	12.88 Volt	890 Pkt	420 Pkt	73 Pcnt	63 Pcnt
1732363303	12.88 Volt	870 Pkt	410 Pkt	70 Pcnt	63 Pcnt
1732362702	12.88 Volt	860 Pkt	410 Pkt	70 Pcnt	63 Pcnt
1732362102	12.88 Volt	870 Pkt	420 Pkt	70 Pcnt	63 Pcnt
1732361501	12.88 Volt	870 Pkt	430 Pkt	69 Pcnt	63 Pcnt
1732360901	12.88 Volt	880 Pkt	440 Pkt	69 Pcnt	63 Pcnt
1732360300	12.88 Volt	890 Pkt	440 Pkt	68 Pcnt	63 Pcnt
1732359700	12.88 Volt	930 Pkt	440 Pkt	70 Pcnt	63 Pcnt
1732359099	12.88 Volt	970 Pkt	440 Pkt	71 Pcnt	63 Pcnt
1732358498	12.88 Volt	970 Pkt	440 Pkt	72 Pcnt	63 Pcnt
1732357898	12.88 Volt	980 Pkt	440 Pkt	70 Pcnt	63 Pcnt
1732357297	12.88 Volt	1010 Pkt	440 Pkt	72 Pcnt	63 Pcnt
1732356697	12.88 Volt	1030 Pkt	450 Pkt	72 Pcnt	63 Pcnt
1732356096	12.88 Volt	1000 Pkt	470 Pkt	70 Pcnt	63 Pcnt
1732355496	12.88 Volt	990 Pkt	470 Pkt	70 Pcnt	63 Pcnt
1732354895	12.88 Volt	990 Pkt	470 Pkt	69 Pcnt	63 Pcnt
1732354294	12.88 Volt	990 Pkt	470 Pkt	70 Pcnt	63 Pcnt
1732353694	12.88 Volt	940 Pkt	470 Pkt	69 Pcnt	63 Pcnt
1732353093	12.88 Volt	910 Pkt	450 Pkt	68 Pcnt	63 Pcnt
1732352493	12.88 Volt	920 Pkt	440 Pkt	69 Pcnt	63 Pcnt
1732351892	12.88 Volt	920 Pkt	430 Pkt	68 Pcnt	63 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Effto: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)