This is the latest recevied telemetry packets stored in our database for station/object 9M2JHZ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Satellite* | HDOP* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1782532326 | 4.37 V | 33 Pkts | 0.59 % | 0 | 0 |
| 1782532262 | 4.4 V | 30 Pkts | 0.64 % | 0 | 0 |
| 1782532194 | 4.37 V | 36 Pkts | 0.55 % | 0 | 0 |
| 1782532129 | 4.37 V | 35 Pkts | 0.51 % | 0 | 0 |
| 1782532065 | 4.38 V | 33 Pkts | 0.6 % | 0 | 0 |
| 1782532001 | 4.37 V | 35 Pkts | 0.65 % | 0 | 0 |
| 1782531937 | 4.37 V | 30 Pkts | 0.63 % | 0 | 0 |
| 1782531873 | 4.37 V | 31 Pkts | 0.62 % | 0 | 0 |
| 1782531741 | 4.37 V | 33 Pkts | 0.56 % | 0 | 0 |
| 1782531676 | 4.37 V | 34 Pkts | 0.54 % | 0 | 0 |
| 1782531612 | 4.37 V | 33 Pkts | 0.6 % | 0 | 0 |
| 1782531548 | 4.37 V | 34 Pkts | 0.56 % | 0 | 0 |
| 1782531423 | 4.38 V | 33 Pkts | 0.61 % | 0 | 0 |
| 1782531358 | 4.37 V | 32 Pkts | 0.77 % | 0 | 0 |
| 1782531291 | 4.37 V | 34 Pkts | 0.61 % | 0 | 0 |
| 1782531164 | 4.37 V | 33 Pkts | 0.56 % | 0 | 0 |
| 1782531099 | 4.37 V | 36 Pkts | 0.48 % | 0 | 0 |
| 1782531035 | 4.37 V | 35 Pkts | 0.56 % | 0 | 0 |
| 1782530971 | 4.37 V | 33 Pkts | 0.56 % | 0 | 0 |
| 1782530908 | 4.37 V | 34 Pkts | 0.59 % | 0 | 0 |
| 1782530843 | 4.37 V | 32 Pkts | 0.56 % | 0 | 0 |
| 1782530775 | 4.38 V | 33 Pkts | 0.67 % | 0 | 0 |
| 1782530712 | 4.37 V | 33 Pkts | 0.53 % | 0 | 0 |
| 1782530580 | 4.38 V | 32 Pkts | 0.78 % | 0 | 0 |
| 1782530516 | 4.37 V | 33 Pkts | 0.56 % | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0
Satellite: 0, 0.01, 0
HDOP: 0, 0.01, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)