APRS Track Direct

My position About ☰

reset

SR9NWC Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR9NWC. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	Rx1h*	Tx1h*	Eff1h*	Eff*
1786746077	29.5 C	430 Pkt	90 Pkt	74 Pcnt	70 Pcnt
1786744273	29 C	430 Pkt	80 Pkt	74 Pcnt	70 Pcnt
1786742471	29 C	420 Pkt	70 Pkt	72 Pcnt	70 Pcnt
1786740670	29 C	400 Pkt	70 Pkt	72 Pcnt	70 Pcnt
1786738867	29.5 C	410 Pkt	80 Pkt	74 Pcnt	70 Pcnt
1786737066	29.5 C	470 Pkt	110 Pkt	70 Pcnt	70 Pcnt
1786735265	29.5 C	580 Pkt	140 Pkt	69 Pcnt	70 Pcnt
1786733462	30 C	590 Pkt	130 Pkt	69 Pcnt	70 Pcnt
1786731660	30 C	570 Pkt	130 Pkt	69 Pcnt	70 Pcnt
1786729859	29.5 C	570 Pkt	150 Pkt	69 Pcnt	70 Pcnt
1786728057	29.5 C	590 Pkt	150 Pkt	67 Pcnt	70 Pcnt
1786726256	29.5 C	550 Pkt	130 Pkt	67 Pcnt	70 Pcnt
1786724454	29 C	510 Pkt	140 Pkt	67 Pcnt	70 Pcnt
1786722652	29.5 C	540 Pkt	140 Pkt	69 Pcnt	70 Pcnt
1786720850	29 C	550 Pkt	110 Pkt	72 Pcnt	70 Pcnt
1786719049	29 C	580 Pkt	120 Pkt	71 Pcnt	70 Pcnt
1786717246	29.5 C	590 Pkt	140 Pkt	70 Pcnt	70 Pcnt
1786715445	29 C	570 Pkt	130 Pkt	72 Pcnt	70 Pcnt
1786713643	29 C	550 Pkt	100 Pkt	72 Pcnt	70 Pcnt
1786711842	29 C	520 Pkt	90 Pkt	72 Pcnt	70 Pcnt
1786710040	29 C	500 Pkt	90 Pkt	74 Pcnt	70 Pcnt
1786708238	29.5 C	490 Pkt	100 Pkt	73 Pcnt	70 Pcnt
1786706436	29.5 C	510 Pkt	130 Pkt	70 Pcnt	70 Pcnt
1786704634	30 C	560 Pkt	160 Pkt	68 Pcnt	70 Pcnt
1786702833	30.5 C	730 Pkt	250 Pkt	64 Pcnt	70 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Rx1h: 0, 10, 0

Tx1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)