APRS Track Direct

My position About ☰

reset

BX6AP-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BX6AP-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Humid*	Light*	Uptime*
1790655003	32.5 degC	61 %	999 100lx	753 min
1790654703	33.3 degC	62 %	999 100lx	748 min
1790654402	33.2 degC	62 %	999 100lx	743 min
1790654103	32.7 degC	62 %	999 100lx	738 min
1790653804	32.8 degC	62 %	999 100lx	733 min
1790653503	32.9 degC	62 %	999 100lx	728 min
1790653203	32 degC	62 %	999 100lx	723 min
1790652902	33.5 degC	63 %	999 100lx	718 min
1790652604	33.4 degC	63 %	999 100lx	713 min
1790652304	34.1 degC	63 %	999 100lx	708 min
1790652003	32.9 degC	64 %	999 100lx	703 min
1790651705	33 degC	64 %	999 100lx	698 min
1790651402	33.7 degC	64 %	999 100lx	693 min
1790651102	31.6 degC	63 %	528 100lx	688 min
1790650803	33.8 degC	64 %	999 100lx	683 min
1790650502	33.2 degC	64 %	999 100lx	678 min
1790650202	33.8 degC	64 %	999 100lx	673 min
1790649903	33.6 degC	65 %	999 100lx	668 min
1790649603	33.5 degC	65 %	999 100lx	663 min
1790649303	33 degC	65 %	999 100lx	658 min
1790649003	33.5 degC	66 %	999 100lx	653 min
1790648702	32.6 degC	66 %	999 100lx	648 min
1790648402	32.1 degC	66 %	999 100lx	643 min
1790648103	33.4 degC	67 %	999 100lx	638 min
1790647802	31.3 degC	67 %	623 100lx	633 min

*Used Equation Coefficients:

Temp: 0, 0.1, 0

Humid: 0, 1, 0

Light: 0, 1, 0

Gust: 0, 1, 0

Uptime: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)