This is the latest recevied telemetry packets stored in our database for station/object SP9GWP-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791762854 | 3 Count | 454 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791762497 | 2 Count | 440 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791758957 | 1 Count | 288 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791755416 | 0 Count | 139 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791751875 | 6 Count | 1011 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791748335 | 5 Count | 863 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791744794 | 4 Count | 677 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791741253 | 3 Count | 544 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791740894 | 2 Count | 528 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791737353 | 1 Count | 366 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791733813 | 0 Count | 194 Count | 0 Count | 0.28 VDC | 1.32 VDC |
| 1791730272 | 9 Count | 1120 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791726731 | 8 Count | 932 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791723191 | 7 Count | 786 Count | 0 Count | 0.28 VDC | 1.5 VDC |
| 1791719650 | 6 Count | 631 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791718752 | 5 Count | 595 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791716951 | 4 Count | 528 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791715157 | 3 Count | 457 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791713357 | 2 Count | 344 Count | 0 Count | 0.28 VDC | 1.44 VDC |
| 1791711556 | 1 Count | 205 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791709755 | 0 Count | 81 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791707955 | 14 Count | 1025 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791706154 | 13 Count | 952 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791704353 | 12 Count | 890 Count | 0 Count | 0.28 VDC | 3.12 VDC |
| 1791702553 | 11 Count | 828 Count | 0 Count | 0.28 VDC | 3.12 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)