This is the latest recevied telemetry packets stored in our database for station/object VE5XW-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719840635 | 487 | 591 | 587 | 507 | 0 |
1719840035 | 482 | 590 | 587 | 500 | 0 |
1719839434 | 481 | 590 | 586 | 498 | 0 |
1719838834 | 480 | 591 | 586 | 497 | 0 |
1719838236 | 481 | 591 | 586 | 499 | 0 |
1719837634 | 481 | 590 | 585 | 497 | 0 |
1719837034 | 479 | 591 | 584 | 494 | 0 |
1719836434 | 479 | 591 | 584 | 493 | 0 |
1719835832 | 479 | 591 | 584 | 491 | 0 |
1719835232 | 478 | 590 | 584 | 491 | 0 |
1719834632 | 478 | 591 | 584 | 491 | 0 |
1719834035 | 478 | 591 | 584 | 489 | 0 |
1719833431 | 477 | 591 | 584 | 487 | 0 |
1719832832 | 477 | 591 | 584 | 488 | 0 |
1719832232 | 477 | 591 | 585 | 488 | 0 |
1719831630 | 477 | 591 | 585 | 488 | 0 |
1719831030 | 477 | 591 | 585 | 487 | 0 |
1719830430 | 477 | 591 | 585 | 488 | 0 |
1719829830 | 476 | 591 | 584 | 486 | 0 |
1719829230 | 477 | 591 | 584 | 487 | 0 |
1719828628 | 477 | 591 | 584 | 486 | 0 |
1719828028 | 477 | 591 | 584 | 488 | 0 |
1719827428 | 477 | 591 | 584 | 488 | 0 |
1719826828 | 477 | 591 | 584 | 487 | 0 |
1719826228 | 478 | 592 | 584 | 489 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)