This is the latest recevied telemetry packets stored in our database for station/object VK2XSO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750271064 | 140 | 0 | 0 | 0 | 0 |
| 1750270762 | 141 | 0 | 0 | 0 | 0 |
| 1750270460 | 140 | 0 | 0 | 0 | 0 |
| 1750270158 | 140 | 0 | 0 | 0 | 0 |
| 1750269855 | 139 | 0 | 0 | 0 | 0 |
| 1750269553 | 140 | 0 | 0 | 0 | 0 |
| 1750269251 | 140 | 0 | 0 | 0 | 0 |
| 1750268948 | 140 | 0 | 0 | 0 | 0 |
| 1750268646 | 140 | 0 | 0 | 0 | 0 |
| 1750268344 | 140 | 0 | 0 | 0 | 0 |
| 1750268041 | 141 | 0 | 0 | 0 | 0 |
| 1750267739 | 140 | 0 | 0 | 0 | 0 |
| 1750267437 | 140 | 0 | 0 | 0 | 0 |
| 1750267135 | 140 | 0 | 0 | 0 | 0 |
| 1750266832 | 140 | 0 | 0 | 0 | 0 |
| 1750266530 | 139 | 0 | 0 | 0 | 0 |
| 1750266228 | 140 | 0 | 0 | 0 | 0 |
| 1750265926 | 141 | 0 | 0 | 0 | 0 |
| 1750265623 | 140 | 0 | 0 | 0 | 0 |
| 1750265321 | 140 | 0 | 0 | 0 | 0 |
| 1750265019 | 140 | 0 | 0 | 0 | 0 |
| 1750264717 | 140 | 0 | 0 | 0 | 0 |
| 1750264414 | 140 | 0 | 0 | 0 | 0 |
| 1750264112 | 140 | 0 | 0 | 0 | 0 |
| 1750263810 | 140 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)