This is the latest recevied telemetry packets stored in our database for station/object OE1KFR-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | press* | temp.in* | hum* | eGAS* | temp.out* |
|---|---|---|---|---|---|
| 1732306640 | 980.2 hPa | 21.1 C deg | 58.6 % | 371 - | 0 C deg |
| 1732304845 | 979.9 hPa | 21.1 C deg | 58.7 % | 374 - | 0 C deg |
| 1732303041 | 979.4 hPa | 21.1 C deg | 58.9 % | 377 - | 0 C deg |
| 1732299440 | 978.7 hPa | 21 C deg | 59.9 % | 383 - | 0 C deg |
| 1732297650 | 978.3 hPa | 21.2 C deg | 56 % | 451 - | 0 C deg |
| 1732296633 | 978.3 hPa | 20.4 C deg | 56.6 % | 406 - | 0 C deg |
| 1732294829 | 978 hPa | 20.3 C deg | 57.7 % | 403 - | 0 C deg |
| 1732293029 | 977.7 hPa | 20.3 C deg | 57.7 % | 404 - | 0 C deg |
| 1732291229 | 977.1 hPa | 20.2 C deg | 57.8 % | 406 - | 0 C deg |
| 1732289429 | 976.5 hPa | 20.1 C deg | 57.7 % | 405 - | 0 C deg |
| 1732285836 | 975.7 hPa | 20.3 C deg | 57.7 % | 397 - | 0 C deg |
| 1732282245 | 974.4 hPa | 20.2 C deg | 57.8 % | 401 - | 0 C deg |
| 1732275029 | 973.1 hPa | 20.2 C deg | 58 % | 394 - | 0 C deg |
| 1732271431 | 973.2 hPa | 20.1 C deg | 58 % | 391 - | 0 C deg |
| 1732269654 | 972.6 hPa | 20.2 C deg | 58 % | 389 - | 0 C deg |
| 1732267828 | 972.6 hPa | 20.4 C deg | 58 % | 382 - | 0 C deg |
| 1732264229 | 972 hPa | 20.6 C deg | 58.4 % | 381 - | 0 C deg |
| 1732262430 | 971.7 hPa | 20.8 C deg | 53.2 % | 386 - | 0 C deg |
| 1732258834 | 970.8 hPa | 20.9 C deg | 55.2 % | 392 - | 0 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
eGAS: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)