This is the latest recevied telemetry packets stored in our database for station/object DL9DMN-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786738025 | 25.8 deg C | 38.4 % | 0 | 0 | 0 |
| 1786737127 | 25.9 deg C | 38.7 % | 0 | 0 | 0 |
| 1786736225 | 26 deg C | 39.1 % | 0 | 0 | 0 |
| 1786735326 | 26.1 deg C | 40.2 % | 0 | 0 | 0 |
| 1786734425 | 26.1 deg C | 41.1 % | 0 | 0 | 0 |
| 1786733527 | 26.2 deg C | 41.1 % | 0 | 0 | 0 |
| 1786732625 | 26.2 deg C | 40.8 % | 0 | 0 | 0 |
| 1786731724 | 26.2 deg C | 40.3 % | 0 | 0 | 0 |
| 1786730824 | 26.2 deg C | 40.1 % | 0 | 0 | 0 |
| 1786729924 | 26.1 deg C | 40 % | 0 | 0 | 0 |
| 1786729024 | 26.1 deg C | 39.8 % | 0 | 0 | 0 |
| 1786728124 | 26.1 deg C | 39.7 % | 0 | 0 | 0 |
| 1786727795 | 26.1 deg C | 39.8 % | 0 | 0 | 0 |
| 1786726895 | 26.1 deg C | 39.8 % | 0 | 0 | 0 |
| 1786725995 | 26.1 deg C | 39.7 % | 0 | 0 | 0 |
| 1786725095 | 26.1 deg C | 39.7 % | 0 | 0 | 0 |
| 1786724195 | 26 deg C | 39.7 % | 0 | 0 | 0 |
| 1786723295 | 26 deg C | 39.7 % | 0 | 0 | 0 |
| 1786722394 | 26 deg C | 39.5 % | 0 | 0 | 0 |
| 1786721494 | 25.9 deg C | 39.7 % | 0 | 0 | 0 |
| 1786720594 | 25.9 deg C | 39.6 % | 0 | 0 | 0 |
| 1786719694 | 25.8 deg C | 39.8 % | 0 | 0 | 0 |
| 1786718794 | 25.8 deg C | 39.7 % | 0 | 0 | 0 |
| 1786717894 | 25.7 deg C | 39.8 % | 0 | 0 | 0 |
| 1786716994 | 25.6 deg C | 39.8 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)