APRS Track Direct

My position About ☰

reset

IZ4VVL Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IZ4VVL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff*
1732224459	84 Pkt	530 Pkt	0.23 Pcnt	61 Pcnt
1732224158	64 Pkt	520 Pkt	0.23 Pcnt	61 Pcnt
1732223859	78 Pkt	530 Pkt	0.23 Pcnt	61 Pcnt
1732223558	68 Pkt	530 Pkt	0.23 Pcnt	61 Pcnt
1732223258	81 Pkt	550 Pkt	0.23 Pcnt	61 Pcnt
1732222959	62 Pkt	550 Pkt	0.23 Pcnt	61 Pcnt
1732222659	75 Pkt	570 Pkt	0.23 Pcnt	61 Pcnt
1732222358	85 Pkt	570 Pkt	0.23 Pcnt	61 Pcnt
1732222059	92 Pkt	590 Pkt	0.23 Pcnt	61 Pcnt
1732221759	79 Pkt	590 Pkt	0.23 Pcnt	61 Pcnt
1732221459	89 Pkt	600 Pkt	0.23 Pcnt	61 Pcnt
1732221159	79 Pkt	580 Pkt	0.23 Pcnt	61 Pcnt
1732220859	86 Pkt	590 Pkt	0.23 Pcnt	61 Pcnt
1732220559	79 Pkt	580 Pkt	0.23 Pcnt	61 Pcnt
1732220258	97 Pkt	580 Pkt	0.23 Pcnt	61 Pcnt
1732219959	94 Pkt	570 Pkt	0.23 Pcnt	61 Pcnt
1732219659	97 Pkt	580 Pkt	0.23 Pcnt	61 Pcnt
1732219359	77 Pkt	570 Pkt	0.23 Pcnt	61 Pcnt
1732219059	96 Pkt	570 Pkt	0.23 Pcnt	61 Pcnt
1732218759	97 Pkt	570 Pkt	0.23 Pcnt	61 Pcnt
1732218459	96 Pkt	560 Pkt	0.23 Pcnt	61 Pcnt
1732218159	83 Pkt	560 Pkt	0.23 Pcnt	61 Pcnt
1732217859	82 Pkt	550 Pkt	0.23 Pcnt	61 Pcnt
1732217559	76 Pkt	540 Pkt	0.23 Pcnt	61 Pcnt
1732217259	83 Pkt	560 Pkt	0.23 Pcnt	61 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)