This is the latest recevied telemetry packets stored in our database for station/object SR5RAD-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274736 | 230 | 1 | 140 | 0 | 0 |
| 1836274617 | 230 | 1 | 141 | 0 | 0 |
| 1836274497 | 230 | 1 | 143 | 0 | 0 |
| 1836274466 | 230 | 1 | 140 | 0 | 0 |
| 1836274376 | 230 | 1 | 140 | 0 | 0 |
| 1836274346 | 230 | 1 | 143 | 0 | 0 |
| 1836274256 | 220 | 1 | 140 | 0 | 0 |
| 1836274227 | 230 | 1 | 139 | 0 | 0 |
| 1836274140 | 230 | 1 | 141 | 0 | 0 |
| 1836274106 | 230 | 1 | 140 | 0 | 0 |
| 1836274020 | 230 | 1 | 139 | 0 | 0 |
| 1836273896 | 230 | 1 | 139 | 0 | 0 |
| 1766219306 | 170 | 1 | 71 | 0 | 0 |
| 1766219167 | 170 | 1 | 72 | 0 | 0 |
| 1766219048 | 170 | 1 | 76 | 0 | 0 |
| 1766218928 | 160 | 1 | 75 | 0 | 0 |
| 1766218802 | 170 | 1 | 71 | 0 | 0 |
| 1766218688 | 160 | 1 | 73 | 0 | 0 |
| 1766218568 | 170 | 1 | 77 | 0 | 0 |
| 1766218447 | 170 | 1 | 70 | 0 | 0 |
| 1766218327 | 160 | 1 | 70 | 0 | 0 |
| 1766218226 | 170 | 1 | 70 | 0 | 0 |
| 1766218091 | 170 | 1 | 70 | 0 | 0 |
| 1766217967 | 170 | 1 | 71 | 0 | 0 |
| 1766217848 | 170 | 1 | 72 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)