This is the latest recevied telemetry packets stored in our database for station/object IZ1DME-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1739732142 | 88 | 253 | 0 | 0 | 0 |
| 1739730642 | 88 | 254 | 0 | 0 | 0 |
| 1739729142 | 87 | 255 | 0 | 0 | 0 |
| 1739727642 | 88 | 257 | 0 | 0 | 0 |
| 1739726143 | 90 | 259 | 0 | 0 | 0 |
| 1739724642 | 91 | 261 | 0 | 0 | 0 |
| 1739723143 | 91 | 263 | 0 | 0 | 0 |
| 1739721643 | 89 | 266 | 0 | 0 | 0 |
| 1739720142 | 89 | 272 | 0 | 0 | 0 |
| 1739718642 | 86 | 277 | 0 | 0 | 0 |
| 1739717143 | 91 | 279 | 0 | 0 | 0 |
| 1739715646 | 92 | 286 | 0 | 0 | 0 |
| 1739714157 | 91 | 285 | 0 | 0 | 0 |
| 1739712643 | 87 | 285 | 0 | 0 | 0 |
| 1739711143 | 90 | 284 | 0 | 0 | 0 |
| 1739709642 | 90 | 284 | 0 | 0 | 0 |
| 1739708142 | 85 | 283 | 0 | 0 | 0 |
| 1739706642 | 86 | 283 | 0 | 0 | 0 |
| 1739705142 | 94 | 282 | 0 | 0 | 0 |
| 1739703642 | 88 | 282 | 0 | 0 | 0 |
| 1739702142 | 87 | 282 | 0 | 0 | 0 |
| 1739700643 | 91 | 265 | 0 | 0 | 0 |
| 1739699142 | 91 | 232 | 0 | 0 | 0 |
| 1739697642 | 87 | 227 | 0 | 0 | 0 |
| 1739696142 | 88 | 225 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)