APRS Track Direct

My position About ☰

reset

XE2RCS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object XE2RCS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1790657725	0.44 Load	67.68 DegC	81 Mb	4 Pkt	10 Pkt
1790657426	0.49 Load	66.6 DegC	84 Mb	5 Pkt	10 Pkt
1790657125	0.54 Load	67.68 DegC	80 Mb	5 Pkt	10 Pkt
1790656825	0.41 Load	67.68 DegC	79 Mb	4 Pkt	11 Pkt
1790656525	0.37 Load	66.6 DegC	84 Mb	4 Pkt	10 Pkt
1790656225	0.33 Load	66.6 DegC	81 Mb	5 Pkt	10 Pkt
1790655926	0.39 Load	67.68 DegC	80 Mb	5 Pkt	10 Pkt
1790655625	0.35 Load	67.68 DegC	80 Mb	4 Pkt	11 Pkt
1790655325	0.44 Load	66.6 DegC	84 Mb	4 Pkt	11 Pkt
1790655026	0.43 Load	66.6 DegC	80 Mb	4 Pkt	11 Pkt
1790654725	0.55 Load	66.6 DegC	84 Mb	4 Pkt	11 Pkt
1790654426	0.47 Load	66.6 DegC	81 Mb	5 Pkt	11 Pkt
1790654125	0.48 Load	66.6 DegC	81 Mb	4 Pkt	10 Pkt
1790653825	0.46 Load	67.68 DegC	82 Mb	4 Pkt	10 Pkt
1790653525	0.42 Load	67.14 DegC	81 Mb	4 Pkt	10 Pkt
1790653225	0.45 Load	67.68 DegC	84 Mb	4 Pkt	11 Pkt
1790652925	0.39 Load	67.14 DegC	81 Mb	4 Pkt	10 Pkt
1790652625	0.4 Load	67.14 DegC	82 Mb	4 Pkt	11 Pkt
1790652325	0.38 Load	67.68 DegC	81 Mb	4 Pkt	11 Pkt
1790652026	0.39 Load	67.68 DegC	82 Mb	4 Pkt	11 Pkt
1790651725	0.41 Load	67.68 DegC	82 Mb	4 Pkt	10 Pkt
1790651425	0.49 Load	67.68 DegC	82 Mb	5 Pkt	11 Pkt
1790651125	0.45 Load	67.14 DegC	82 Mb	4 Pkt	10 Pkt
1790650825	0.4 Load	68.22 DegC	81 Mb	4 Pkt	10 Pkt
1790650525	0.41 Load	67.14 DegC	84 Mb	4 Pkt	10 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)