APRS Track Direct

My position About ☰

reset

WB9TLH-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WB9TLH-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Rx1h*	Digi1h*	Eff1h*	Efftot*
1758190762	430 Pkt	190 Pkt	63 Pcnt	47 Pcnt
1758188960	350 Pkt	160 Pkt	56 Pcnt	47 Pcnt
1758187158	250 Pkt	140 Pkt	54 Pcnt	47 Pcnt
1758185356	250 Pkt	130 Pkt	53 Pcnt	47 Pcnt
1758183555	370 Pkt	150 Pkt	55 Pcnt	47 Pcnt
1758181753	350 Pkt	160 Pkt	52 Pcnt	47 Pcnt
1758179951	340 Pkt	150 Pkt	54 Pcnt	47 Pcnt
1758178149	340 Pkt	160 Pkt	57 Pcnt	47 Pcnt
1758176348	360 Pkt	170 Pkt	62 Pcnt	47 Pcnt
1758174546	390 Pkt	170 Pkt	68 Pcnt	47 Pcnt
1758172744	380 Pkt	170 Pkt	72 Pcnt	47 Pcnt
1758170942	380 Pkt	180 Pkt	72 Pcnt	47 Pcnt
1758169140	390 Pkt	190 Pkt	72 Pcnt	47 Pcnt
1758167339	390 Pkt	180 Pkt	70 Pcnt	47 Pcnt
1758165537	360 Pkt	160 Pkt	66 Pcnt	47 Pcnt
1758163735	290 Pkt	150 Pkt	58 Pcnt	47 Pcnt
1758161933	240 Pkt	150 Pkt	50 Pcnt	47 Pcnt
1758160132	180 Pkt	130 Pkt	38 Pcnt	47 Pcnt
1758158330	190 Pkt	130 Pkt	37 Pcnt	47 Pcnt
1758156528	210 Pkt	140 Pkt	40 Pcnt	47 Pcnt
1758154726	210 Pkt	130 Pkt	41 Pcnt	47 Pcnt
1758152925	220 Pkt	130 Pkt	44 Pcnt	47 Pcnt
1758151123	270 Pkt	140 Pkt	48 Pcnt	47 Pcnt
1758149321	320 Pkt	170 Pkt	56 Pcnt	47 Pcnt
1758147519	330 Pkt	180 Pkt	54 Pcnt	47 Pcnt

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Digi1h: 0, 10, 0

Eff1h: 0, 1, 0

Efftot: 0, 1, 0

Volt: 0, 0.079, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)