This is the latest recevied telemetry packets stored in our database for station/object DL4ALL-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | press* | temp.in* | hum* | eGAS* | temp.out* |
|---|---|---|---|---|---|
| 1732374964 | 968 hPa | 26.4 C deg | 34 % | 33 - | 0 C deg |
| 1732373164 | 968.3 hPa | 26.3 C deg | 33.3 % | 35 - | 0 C deg |
| 1732371364 | 969 hPa | 26.2 C deg | 32 % | 41 - | 0 C deg |
| 1732369564 | 969.2 hPa | 26 C deg | 31.8 % | 46 - | 0 C deg |
| 1732367764 | 968.9 hPa | 25.9 C deg | 32 % | 46 - | 0 C deg |
| 1732365963 | 969.3 hPa | 25.8 C deg | 32.4 % | 46 - | 0 C deg |
| 1732364163 | 970 hPa | 25.6 C deg | 32.6 % | 46 - | 0 C deg |
| 1732362363 | 970.7 hPa | 25.3 C deg | 33 % | 47 - | 0 C deg |
| 1732360563 | 971 hPa | 24.8 C deg | 33.2 % | 48 - | 0 C deg |
| 1732358763 | 971 hPa | 24.5 C deg | 33.4 % | 48 - | 0 C deg |
| 1732356963 | 971.3 hPa | 24.3 C deg | 33.4 % | 49 - | 0 C deg |
| 1732355163 | 971.5 hPa | 24.2 C deg | 33.3 % | 50 - | 0 C deg |
| 1732353363 | 971.3 hPa | 24.1 C deg | 32.6 % | 51 - | 0 C deg |
| 1732351563 | 971.3 hPa | 24.2 C deg | 32.5 % | 51 - | 0 C deg |
| 1732349763 | 971.3 hPa | 24.4 C deg | 32.4 % | 51 - | 0 C deg |
| 1732347962 | 971.3 hPa | 24.6 C deg | 32.3 % | 50 - | 0 C deg |
| 1732346162 | 971.1 hPa | 24.7 C deg | 32.3 % | 50 - | 0 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
eGAS: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)