APRS Track Direct

My position About ☰

reset

N5DRP-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N5DRP-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	A5*
1732571129	13.88 Volt	810 Pkt	130 Pkt	89 Pcnt	0 None
1732569329	13.88 Volt	760 Pkt	130 Pkt	87 Pcnt	0 None
1732567529	13.88 Volt	610 Pkt	140 Pkt	90 Pcnt	0 None
1732565729	13.88 Volt	510 Pkt	140 Pkt	96 Pcnt	0 None
1732563929	13.88 Volt	510 Pkt	130 Pkt	96 Pcnt	0 None
1732562129	13.88 Volt	500 Pkt	140 Pkt	96 Pcnt	0 None
1732560330	13.88 Volt	490 Pkt	130 Pkt	96 Pcnt	0 None
1732558904	-	-	-	-	-
1732558530	13.88 Volt	450 Pkt	110 Pkt	93 Pcnt	0 None
1732558480	-	-	-	-	-
1732556730	13.88 Volt	500 Pkt	110 Pkt	91 Pcnt	0 None
1732553131	13.88 Volt	500 Pkt	130 Pkt	95 Pcnt	0 None
1732551330	13.88 Volt	510 Pkt	130 Pkt	96 Pcnt	0 None
1732551281	-	-	-	-	-
1732549530	13.88 Volt	500 Pkt	120 Pkt	96 Pcnt	0 None
1732545930	13.88 Volt	620 Pkt	140 Pkt	92 Pcnt	0 None
1732544080	-	-	-	-	-
1732542330	13.65 Volt	440 Pkt	110 Pkt	94 Pcnt	0 None
1732538730	13.88 Volt	360 Pkt	90 Pkt	94 Pcnt	0 None
1732536930	13.88 Volt	390 Pkt	120 Pkt	94 Pcnt	0 None
1732536880	-	-	-	-	-
1732533330	13.88 Volt	440 Pkt	130 Pkt	96 Pcnt	0 None
1732531530	13.88 Volt	470 Pkt	130 Pkt	98 Pcnt	0 None
1732527930	13.88 Volt	440 Pkt	130 Pkt	96 Pcnt	0 None
1732526130	13.88 Volt	470 Pkt	140 Pkt	97 Pcnt	0 None

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)