This is the latest recevied telemetry packets stored in our database for station/object DA0WW-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | DM0FG* | DB0WSL* | DB0PZ* | EVHYG* | RESV* |
|---|---|---|---|---|---|
| 1790662700 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790660893 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790655462 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790646415 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790644605 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790639182 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790637367 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790633749 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790630130 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790628322 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790626511 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790624705 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790622892 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790621084 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790619274 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790617466 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790615654 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790613848 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790610229 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790604799 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790602991 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790595751 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790593941 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790588513 | 25 C | 27 C | 29 C | 60 % | 0 # |
| 1790586703 | 25 C | 27 C | 29 C | 60 % | 0 # |
*Used Equation Coefficients:
DM0FG: 0, 1, -100
DB0WSL: 0, 1, -100
DB0PZ: 0, 1, -100
EVHYG: 0, 1, 0
RESV: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)