This is the latest recevied telemetry packets stored in our database for station/object DL4ALL-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | press* | temp.in* | hum* | eGAS* | temp.out* |
|---|---|---|---|---|---|
| 1732292159 | 957 hPa | 27.7 C deg | 30.3 % | 44 - | 0 C deg |
| 1732290359 | 956.9 hPa | 27.6 C deg | 30.8 % | 44 - | 0 C deg |
| 1732288559 | 956.5 hPa | 27.4 C deg | 31.1 % | 44 - | 0 C deg |
| 1732286759 | 956.1 hPa | 27.2 C deg | 31.5 % | 44 - | 0 C deg |
| 1732284959 | 955.7 hPa | 26.9 C deg | 31.9 % | 43 - | 0 C deg |
| 1732283159 | 955.5 hPa | 26.5 C deg | 32.5 % | 43 - | 0 C deg |
| 1732281359 | 955.3 hPa | 26.1 C deg | 33 % | 44 - | 0 C deg |
| 1732279559 | 955.3 hPa | 25.9 C deg | 33.2 % | 44 - | 0 C deg |
| 1732277759 | 955.4 hPa | 25.7 C deg | 33.3 % | 44 - | 0 C deg |
| 1732275958 | 955.3 hPa | 25.3 C deg | 33.4 % | 45 - | 0 C deg |
| 1732274158 | 955.4 hPa | 25.2 C deg | 33.8 % | 45 - | 0 C deg |
| 1732272358 | 955 hPa | 24.9 C deg | 34 % | 46 - | 0 C deg |
| 1732270558 | 954.9 hPa | 24.5 C deg | 33.1 % | 47 - | 0 C deg |
| 1732268758 | 954.6 hPa | 24.2 C deg | 33.5 % | 48 - | 0 C deg |
| 1732266958 | 954.3 hPa | 24 C deg | 33.1 % | 49 - | 0 C deg |
| 1732265158 | 954.1 hPa | 24.2 C deg | 32.7 % | 50 - | 0 C deg |
| 1732263358 | 953.9 hPa | 24.4 C deg | 32.5 % | 49 - | 0 C deg |
| 1732261558 | 953.5 hPa | 24.5 C deg | 32.6 % | 49 - | 0 C deg |
| 1732259758 | 953.4 hPa | 24.7 C deg | 32.7 % | 48 - | 0 C deg |
| 1732257957 | 953.1 hPa | 24.9 C deg | 32.8 % | 48 - | 0 C deg |
| 1732256157 | 952.6 hPa | 25.2 C deg | 32.8 % | 47 - | 0 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
eGAS: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)