This is the latest recevied telemetry packets stored in our database for station/object BH2WAV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU-Used* | CPU-Temp* | MEM-Used* | UpSpeed* | DownSpeed* |
|---|---|---|---|---|---|
| 1790070603 | 24.5 % | 47 C | 29 % | 2.12 KBps | 0.67 KBps |
| 1790069703 | 4 % | 48 C | 29 % | 4.41 KBps | 17.15 KBps |
| 1790068805 | 22.5 % | 49 C | 29 % | 0.33 KBps | 0.38 KBps |
| 1790067903 | 22.22 % | 48 C | 29 % | 0.34 KBps | 0.49 KBps |
| 1790067003 | 24.88 % | 47 C | 29 % | 0.26 KBps | 0.36 KBps |
| 1790066106 | 7.5 % | 47 C | 29 % | 0.37 KBps | 0.53 KBps |
| 1790065206 | 1.98 % | 48 C | 29 % | 0.12 KBps | 0.17 KBps |
| 1790064303 | 2.5 % | 47 C | 29 % | 13.02 KBps | 9.65 KBps |
| 1790063403 | 24 % | 50 C | 29 % | 0.07 KBps | 0.05 KBps |
| 1790062506 | 22.39 % | 49 C | 29 % | 5.16 KBps | 5.96 KBps |
| 1790061606 | 26.63 % | 47 C | 29 % | 2.98 KBps | 110.79 KBps |
| 1790060703 | 22.89 % | 49 C | 29 % | 83.97 KBps | 7.1 KBps |
| 1790059807 | 9 % | 49 C | 29 % | 1.4 KBps | 0.86 KBps |
| 1790058903 | 23.5 % | 46 C | 29 % | 0.87 KBps | 1.77 KBps |
| 1790058004 | 24.62 % | 47 C | 29 % | 2.28 KBps | 9.85 KBps |
| 1790057105 | 20.6 % | 47 C | 29 % | 2.32 KBps | 2.25 KBps |
| 1790056202 | 25.63 % | 49 C | 29 % | 6.77 KBps | 13.81 KBps |
| 1790055302 | 24.14 % | 47 C | 29 % | 0.43 KBps | 0.81 KBps |
| 1790054402 | 24.26 % | 49 C | 29 % | 0.07 KBps | 0.1 KBps |
| 1790053503 | 0.5 % | 47 C | 29 % | 0.43 KBps | 0.39 KBps |
| 1790052605 | 1 % | 48 C | 29 % | 20.25 KBps | 9.83 KBps |
| 1790051703 | 22.89 % | 48 C | 29 % | 0.17 KBps | 0.18 KBps |
| 1790050802 | 6.5 % | 48 C | 29 % | 0.49 KBps | 0.25 KBps |
| 1790049904 | 23.38 % | 47 C | 29 % | 0.5 KBps | 0.29 KBps |
| 1790049004 | 25.13 % | 48 C | 29 % | 0.12 KBps | 0.15 KBps |
*Used Equation Coefficients:
CPU-Used: 0, 1, 0
CPU-Temp: 0, 1, 0
MEM-Used: 0, 1, 0
UpSpeed: 0, 1, 0
DownSpeed: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)