This is the latest recevied telemetry packets stored in our database for station/object BH2WAV-0. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU-Used* | CPU-Temp* | MEM-Used* | UpSpeed* | DownSpeed* |
|---|---|---|---|---|---|
| 1790025308 | 4.75 % | 0 C | 29 % | 2.08 KBps | 1.59 KBps |
| 1790024405 | 1 % | 0 C | 29 % | 1.35 KBps | 1.13 KBps |
| 1790023507 | 0.25 % | 0 C | 29 % | 1.85 KBps | 1.4 KBps |
| 1790022605 | 12.88 % | 0 C | 29 % | 1.46 KBps | 1 KBps |
| 1790021704 | 31.25 % | 0 C | 29 % | 1.51 KBps | 0.97 KBps |
| 1790020805 | 15.11 % | 0 C | 29 % | 1.35 KBps | 1.26 KBps |
| 1790019905 | 14.18 % | 0 C | 29 % | 1.47 KBps | 0.9 KBps |
| 1790019004 | 6.22 % | 0 C | 29 % | 1.6 KBps | 1.03 KBps |
| 1790018108 | 0.25 % | 0 C | 29 % | 2.78 KBps | 1.9 KBps |
| 1790017208 | 9.98 % | 0 C | 29 % | 2.54 KBps | 2.13 KBps |
| 1790016307 | 9.52 % | 0 C | 29 % | 2.72 KBps | 1.96 KBps |
| 1790015407 | 12.88 % | 0 C | 29 % | 1.52 KBps | 1.13 KBps |
| 1790014508 | 1.99 % | 0 C | 29 % | 1.5 KBps | 1.23 KBps |
| 1790013605 | 5.01 % | 0 C | 29 % | 1.38 KBps | 1.06 KBps |
| 1790012706 | 2.24 % | 0 C | 29 % | 1.31 KBps | 1 KBps |
| 1790011806 | 8.98 % | 0 C | 29 % | 1.38 KBps | 1.06 KBps |
| 1790010905 | 20.51 % | 0 C | 29 % | 3.03 KBps | 1.93 KBps |
| 1790010006 | 1.74 % | 0 C | 29 % | 3.95 KBps | 3.06 KBps |
| 1790009105 | 0.5 % | 0 C | 29 % | 5.69 KBps | 3.49 KBps |
| 1790008205 | 15.54 % | 0 C | 29 % | 3.07 KBps | 1.97 KBps |
| 1790007305 | 2.01 % | 0 C | 29 % | 2.76 KBps | 2.53 KBps |
| 1790006406 | 17.54 % | 0 C | 29 % | 2.79 KBps | 1.97 KBps |
| 1790005505 | 12.91 % | 0 C | 29 % | 5.11 KBps | 3.22 KBps |
| 1790004611 | 22.31 % | 0 C | 29 % | 6.94 KBps | 5.66 KBps |
| 1790003709 | 14.29 % | 0 C | 29 % | 5.9 KBps | 4.96 KBps |
*Used Equation Coefficients:
CPU-Used: 0, 1, 0
CPU-Temp: 0, 1, 0
MEM-Used: 0, 1, 0
UpSpeed: 0, 1, 0
DownSpeed: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)